15. SET UP MODE |
15.4 Memory Card Operation
15.4.4 Memory Card Copy
You can copy data memory cards.
NOTE: DO NOT remove the memory card while the data copy is in progress. Doing so may destroy the data.
The following screen will appear when the [COPY] key of the Memory Card Operation screen is touched.
Select the copy source and destination by touching the [SLOT 0 SLOT 1] or [SLOT 1 SLOT 0] key.
SLOT 0 to SLOT 1 key
SLOT 1 to SLOT 0 key
Key Functions
Key | Function | |
SLOT 0 | SLOT 1 | Used to copy data of the memory card inserted into SLOT 0 to one in SLOT 1. |
SLOT 1 | SLOT 0 | Used to copy data of the memory card inserted into SLOT 1 to one in SLOT 0. |
After selecting the copy source and destination, the Copy Item Selection screen will appear. Select the item(s) to copy, and touch the [COPY] key.
Touching the [CHECK CAP.] key causes the Memory Capacity Check screen to appear.
Copy Item Selection screen | Memory Capacity Check screen |
Rest Card in SLOT n (Destination) area
SELECT ALL key
Rest Card in SLOT n (Original) area
COPY key | CHECK CAP. key | Total memory of appointed items |
