Toshiba SL-5300 Series owner manual Key Mode Function Refer to

13. OUTLINE OF MAIN MENU EO1-31009

13. OUTLINE OF MAIN MENU

The following table describes the contents of the main menu and their functions.

Key	Mode	Function	Refer to
1	REG.NORMAL	In this mode, you can perform daily operations, such as,	Section
	(LABEL)	weighing commodities, calling the registered PLUs, and	16
		issuing the desired number of labels. You can also change
		the PLU data, select the print items, and adjust the feed
		amount, sensor sensitivity, and print tone.
2	SET UP	In this mode, you can set the date/time, print items, label feed	Section
		amount, sensor sensitivity, print tone, label format, bar code	15
		types, print titles, password, etc. You can also read/write data
		from/to the PC card.
3	PROGRAM	In this mode, you can program the various settings required for	Section
		the daily operation, such as, unit price, ingredient, commodity	14
		name, message, store name and address, tare, SFKC, etc.
4	REPORT	In this mode, you can check the total memory or issue the X
		report of the totals registered in Registration Mode (NORMAL,
		MARK DOWN, REWRAP). Also, it is possible to send the	Section
		registered data from the satellite scales to the master scale.
			19
5	RESET	In this mode, you can reset the total memory, issue the Z
		report of the totals registered in Registration Mode (NORMAL,
		MARK DOWN, REWRAP).
6	REG. MARK DOWN	In this mode, the prices are reduced from the usual prices.	Section
		The transaction data in this mode will be stored separately	17
		from the Registration NORMAL (LABEL) Mode.
7	REG. REWRAP	In this mode, rewrapped products are registered. The	Section
		transaction data in this mode will be stored separately from the	18
		Registration NORMAL (LABEL) Mode.
8	TRAINING (LABEL)	This mode is a training mode intended for operators to learn	Section
		how to operate this scale. Any operations performed in this	20
		mode will not change the data in the memory.
9	SLEEP	This is an energy saving mode that may be used when the	Section
		machine is not used for a long time.	21
10	SLIDE SHOW	In this mode, programmed image data is displayed on the	Section
		operation panel.	22

The modes protected by the password are displayed with a key symbol. To enter these modes, first input the password with the numeric keys, then touch the desired menu key.

NOTE: The Set Up mode has been protected by the initial settings. To enter the Set Up mode, the master password is required. For details, please contact the nearest TOSHIBA TEC service representative or sales agent.

13- 2