Toshiba SL-5300 Series owner manual Upc, To set the UPC Input a UPC max digits Touch the UPC area

14. PROGRAMMING MODE		EO1-31009
		14.2 PLU Data Setting
Item		Procedure
Auto Code,	To set the auto code:
UPC	1. Touch the Auto code area.
	2.	The auto code setting screen will appear.
	3.	Input an Auto code (max. 6 digits).
	4.	Touch the [Decision] key.

To set the UPC:

1.Input a UPC (max. 6 digits).

2.Touch the UPC area.

Decision key Asterisk key

NOTES:

1.Default: 000000

2.When the auto code has been entered, the UPC will become the same number with the auto code.

3.When asterisks (*) are included in the auto code, the input code for UPC can displace them, selected from the lowest digit. See the examples below. Example 1: Auto code = 123***, Input code for UPC = 6543

Example 2: Auto code = 98**54, Input code for UPC = 0211

Unit price	1. Input a 4-digit number.
	st
	2. Touch the “1 Price” area.
	NOTE: The 2nd Price cannot be used at present.
Unit price flag	In case of the lb scale (US model):
	Select “per 1lb”, ‘per 1/2 lb”, or “per 1/4lb”.
	In case of the kg scale (CA model):
	Select “per 1kg” or “per 100g”.
	NOTE: Only “per 1kg” is selectable unless the initial settings are changed.
	When “per 100g” is required, please contact the nearest TOSHIBA TEC
	service representative or sales agent.
Mode flag	Select “WEIGH”, “FIX”, or “BY-COUNT”.
	NOTE: When “BY-COUNT” is selected, the “PIECES” area will need a
	numeric data. Input the number for the “PIECES” area.

14- 6