Toshiba SL-5300 Series owner manual Ascii

	15. SET UP MODE						EO1-31009
							15.7 Wireless LAN
	Procedure
		Item				Procedure
	Setting the ESS ID			1.	Touch the ESS ID area.
				2.	The Edit screen will appear.
				3.	Input an alphanumeric data. (Refer to NOTE 1.)
	Setting the encryption			Touch the Yes or No area. When the Yes area is touched, the WEP
	status			type and WEP key code settings will be effective. (Refer to NOTE 2.)
	Selecting the WEP key type			Touch the ASCII or HEX area.
	Setting the transmit key			1.	Touch the Transmit key area.
				2.	The Edit screen will appear.
				3.	Enter a transmit key name.
	Setting Authentication			Touch the Open-system or Shared-key area. (Refer to NOTE 3.)
	Default key number			Select one of the transmit keys. Each time the Default Key No. window
				is touched, the displayed number changes among 1 to 4.
	Setting Antenna			1. Touch the Antenna selection area.
				2.	The following menu will appear.
				3.	Select the Diversity, ANTENNA-A, or ANTENNA-B.
	NOTES:
1.		ESSID (Extended Service Set Identifier (IEEE802.11))
		Max. 32 characters (32 byte ASCII)
		The vacant area should be set to zero. The default setting is zero.
2.		Encryption (Enable/Disable, WEP type, eacp WEP key code)
		ASCII 5 characters or 10 digit HEX code.
		All digits should be filled, or an error occurs and entered data is cleared.
		The default setting is all zeros, which means the encryption is disabled.
		Level		Key length		ASCII	Example
		40 bit	0x + 10 digits			5 characters	0xABCDE23456
		128 bit	0x + 26 digits			Disabled	26 digits = 5+4+4+4+4
3.		Authentication (Open-system/Shared-key)
		It depends on the Access Point setting.

15-50