Toshiba SL-5300 Series owner manual Used to add a new message

14. PROGRAMMING MODE		EO1-31009
		14.20 Operator’s Hint Setting
Key Functions
Key	Function
SORT	Used to defragment the data in the flash ROM.
	Since this machine uses the flash ROM, repeated data input may disable the
	data entry in spite of sufficient memory capacity. (“Memory not enough error” will
	appear.)
	When the [SORT] key is touched, the confirmation screen will appear. To
	execute, touch the [GO] key, or [CANCEL] key to cancel.
	It takes a while to complete the data sort.
SEARCH CODE	Used to search the desired hint No. and display it on top of the list.
ADD	Used to add a new message.
COPY	Used to copy the message to other hint No.
DELETE	Used to delete the desired hint No.
CHANGE CODE	Used to change the hint No.

Procedure

Item		Procedure
Adding a new hint No.	1. Input a new hint No. (1 – 99)
	2.	Touch the [ADD] key.
Selecting and programming	1. Touch the desired hint No. area.
the hint message	2. Touch the same hint No. area again to program.
	3.	Enter a message on the edit screen (32 characters by 2 lines).
Searching the hint No.	1. Input the desired hint No.
	2.	Touch the [SEARCH CODE] key.
Copying the hint message	1. Touch the hint No. area of copy source.
	2.	Input the hint No. of copy destination.
	3.	Touch the [COPY] key.
Deleting the hint No.	1. Touch the hint No. area to be deleted.
	2.	Input the hint No. to be deleted.
	3.	Touch the [DELETE] key.
Changing the hint No.	1. Touch the desired hint No. area.
	2.	Input a new hint No.
	3.	Touch the [CHANGE CODE] key.

NOTE: When the already existing hint No. is input sounds and an error message is displayed. operation.

for the copy or No. change operation, a beep tone Overwrite ([GO] key) or cancel ([Cancel] key) the

14-59