Toshiba SL-5300 Series owner manual Vendor Setting, Key Functions

14. PROGRAMMING MODE EO1-31009

14.12 Vendor Setting

14.12 Vendor Setting

You can set the vendor names with this menu.

The following screen will appear when the [Vendor] key of the Programming Mode Main Menu is touched.

Vendor Name area

Vendor No. area

SEARCH CODE key

				CHANGE CODE key
Key Functions			ADD key	COPY key DELETE key
Key			Function
SEARCH CODE	Used to search the desired vendor No. and display it on top of the list.
ADD	Used to add a new vendor.
COPY	Used to copy the data to other vendor No.
DELETE	Used to delete the desired vendor No.
CHANGE CODE	Used to change the vendor No.
Procedure
Item				Procedure
Adding a new vendor		1. Input 2-digit vendor No. (01 – 99)
		2.	Touch the [ADD] key.
		3.	Touch the data entry area and enter the data.
Selecting a vendor No. and		1. Touch the Vendor No. area.
editing the vendor		2. Touch the same Vendor No. area again to edit the vendor name
		(max. 24 characters).
Searching a vendor No.		1. Input the vendor No. you desire to search.
		2.	Touch the [SEARCH CODE] key.
Copying the vendor		1. Touch the vendor No. area of copy source.
		2.	Input the vendor No. of copy destination.
		3.	Touch the [COPY] key.
Deleting the vendor		1. Touch the vendor No. area to be deleted.
		2.	Input the vendor No.
		3.	Touch the [DELETE] key.
Changing the vendor No.		1. Touch the vendor No. area you desire to change.
		2.	Input a new vendor No.
		3.	Touch the [CHANGE CODE] key.

NOTE: When the already existing vendor No. is input for the copy or No. change operation, a beep tone sounds and an error message is displayed. Overwrite ([GO] key) or cancel ([Cancel] key) the operation.

14-42