16. REGISTRATION MODE

EO1-31009

16.2 Basic Operations

16.2Basic Operations

In this section basic daily operations such as calling a PLU, setting a tare, weighing a commodity, etc. are described.

16.2.1 Zero Count Setting

You can set the zero count with this menu.

When nothing is placed on the platter, “0.000” should be displayed on the Weight area. If not, it is necessary to adjust the zero count.

ZERO key

Weight area

NG

OK

1.Make sure that there is nothing on the platter.

2.Touch the [ZERO] key.

NOTE: Only the US model will display the message “ZERO SETTING” during the zero count adjustment. After completed, the message will disappear.

16-15

Page 161
Image 161
Toshiba SL-5300 Series owner manual Basic Operations, Zero Count Setting