Toshiba SL-5300 Series owner manual Home, Next Item, Last Item Rotation

15. SET UP MODE				EO1-31009
				15.2 Label Format Setting
Key Functions
	Key			Function
	HOME	Used to restore the print item to the initial position.
		Used to fine adjust the print position. One touch of these keys causes 0.125
		mm change.
	NEXT ITEM/	Used to select the item to be adjusted.
	LAST ITEM
	ROTATION	Used to change the rotation of the print item. One touch of this key causes the
		print item to turn clockwise by 90 degrees. When the print item cannot be
		rotated, a buzzer sounds.
	FORMAT PRINT	Used to print the label format displayed on the format image area.
Procedure
	Item			Procedure
	Changing the type No.		1.	Input a type number.
			2.	Touch the Type area.
			NOTE: When an improper number is input, a buzzer sounds or an error
			occurs. The effective type number depends on the format No. or Item.
	Showing the Type		1.	Touch Explanation area.
	Explanation screen		2. The print item’s format list is shown. (Refer to the Format Type List
			screen.)
			NOTE: The format type can be changed from this list. When changed, the
			type No. is also changed accordingly.
	Changing X or Y position		1.	Input a value.
			2.	Touch the X or Y area.
			Or,
			1.	Touch the location on the screen where you desire to position the
			print item.
			NOTE: Programmable value range depends on the format No. or Item.
			(Unit: 0.125 mm)
	Setting the number of lines		1.	Input a value. (Max. 38 lines)
	for the Ingredient		2.	Touch the Line ct. area.
			NOTE: The acceptable value depends on the label size.
	Setting the logo print size		1.	Input a value.
			2.	Touch the X or Y area.
			NOTE: Regarding the logo print size, refer to Section 14.2.

15- 8