Toshiba SL-5300 Series owner manual Move the media guide to the label edge

8. LOADING/REPLACING THE MEDIA EO1-31009

8. LOADING/REPLACING THE MEDIA

5.Move the media guide to the label edge.

Media Guide

NOTE: When the labels are issued in strip mode, provide about 1 mm gap between the backing paper edge and the media guide.

6.To issue the label in the strip mode, skip this step. To issue the label in the batch mode, push the label cassette into the scale with the top edge of the label protruding from the media outlet. Press the [FEED] button to check that the labels are fed properly. Now the label loading for the batch mode is completed.

FEED Button

7.When using the strip issue, remove the backing paper stopper from the take-up shaft.

Take-up Shaft

Backing Paper Stopper

8- 3