DLL LAN Master/Satellite System Setting | Toshiba SL-5300 Series

	14. PROGRAMMING MODE		EO1-31009
			14.19 DLL (LAN Master/Satellite System) Setting

	Procedure
	Item		Procedure
	Setting to OFF Line	1.	Touch the [OFF LINE] key.
		2.	Touch the [BACK] key.
		3.	Turn the power off and then on again according to the message.
	Designating the scale to a	1.	Touch the [MASTER] key.
	master and setting the IP	2.	Touch the [BACK] key twice.
	address	3.	Turn the power off and then on again according to the message.
		NOTE: When the scale is designated to a master, its IP address will
		appear as ID01 (MASTER ID) automatically. Also, all of the satellites IP
		addresses are automatically displayed.
	Designating the scale to a	1.	Touch the [SATELLITE] key.
	satellite and setting the IP	2.	Input the IP address of the master scale.
	address	3.	Touch the IP address area (ID No. 1).
		4.	Touch the [BACK] key twice.
		5.	Turn the power off and then on again according to the message.
		NOTE: When the scale is designated to a satellite, set the master
		scale’s IP address only.

14.19 DLL (LAN Master/Satellite System) Setting

When the scale is designated to the master, you can download the data to the satellite using the LAN. (Refer to Section 14.18.)

The following screen will appear when the [DLL (LAN)] key of the Programming Mode Main Menu is touched. Select the item to be downloaded and destination satellite.

ALL key

OPEN key

CLOSE key

Item key

ALL SATELLITES key

CANCEL key

Scale ID# key ID02 –ID16

DISCONNECT key

DLL key

14-56

Image 91

Toshiba SL-5300 Series owner manual DLL LAN Master/Satellite System Setting

Contents

SL-5300 Series Page Meanings of Each Symbol Safety Summary Precautions Table of Contents 15-1 14-116-1 20-1 17-118-1 19-1 Introduction Applicable Model AccessoriesSL-5300-30M-US Scale Specification OP-5300-PIGGYBACK-1MB Option Appearance DimensionsLabel Cassette Connector Panel As viewed from the top As viewed from the right side Procedure Before Daily OperationInstallation of the Scale Preparation Inserting the Power Cord Level Adjustment Turning the Power on Turning the Power ON/OFF Turning the Power OFF LOADING/REPLACING the Media Label Roll Holder Media Roll Stopper Media Guide Move the media guide to the label edge LOADING/REPLACING the Media Tilt Angle Adjustment Operational PrecautionsOperation Panel US Model CA Model Layout of the Operation Panel DOWN/REG. Rewrap US Model CUSTOMER’S Display CA Model Spanish Display Sticker 000 000000 Cleaning Daily MaintenancePrint Head Covers and Platter Platen and Media Roll HolderOperation Panel Removing the Jammed Media Media Guide Adjustment Inserting the PC Card PC Card HandlingEjecting the PC Card Outline of Main Menu Key Mode Function Refer to Menu Programming ModeKey Functions Back Enter Edit Screen Idiom area PLU Data Setting Short key Procedure To set the UPC Input a UPC max digits Touch the UPC area UPC Procedure Second screen FSP Frequent Shoppers To set the sale promotion schedule No Procedure Third screen Search Code Department SettingChange Code Key Function Ingredient SettingSort Nutrition Facts Setting Used to add a new Nutrition Facts No Touch The Nutrients part 2 key Touch The Serving Size keyTouch the Calories and Calories from Fat key Touch The Nutrients part 1 key Nutrition Facts Format Templates Calories Setting Serving Size Setting Edit key Back key Additional Nutrient Table Nutrition Setting 1/2 Nutrition Setting 2/2 Additional Nutrition Table Additional Title Change 1/2 Additional Title Change 2/2 Footnote Setting Recipe Setting Used to add a new recipe Grade Line Setting Key functions Function Message/Information Setting Key Function Store Name/Address Setting Scrolling Message Setting MSG. Link CancelScrolling Message Edit Screen MSG./LOGO GO UP Combination Report SettingStay GO Left Combination Report Edit screen EditPROG. Data Link 1 Link Report number table 14-37 14-38 14-39 14-40 14-41 Vendor Setting Label Mode Sfkc Setting Sfkc Programming screen Function keys Sfkc Programming screen Speed keys Key size Function Zero Sfkc Programming List Key Function Edit Sfkc sheet No Key Function Edit Sfkc sheet No Idiom Setting Confirmation Label Setting Stop PrintPause Restart Promotion Setting Used to copy the data to other promotion No ALL Schedule Setting Tuesday Satellite Inline LAN Master/Satellite System SettingOFF Line Master DLL LAN Master/Satellite System Setting Disconnect OpenClose ALL Satellites Selecting the all satellites Operator’s Hint SettingTouch the ALL Satellites key Used to add a new message Changing the Unit Price SET UP Mode Set Up Mode Menu Function Refer to Date/Time Setting AM/PM Label Format Setting Format Copy Format ResetFree Format Format List Print coordinate diagram Free Format Arrangement Format Image Screen Input a value Touch the X or Y area Next Item HomeLast Item Rotation Format Type List screen Format Copy and New Format No. Addition Label Format List Touch the Format Reset key Format Reset Label Format Table 15-13 Label Format Image 15-15 15-16 15-17 15-18 15-19 15-20 15-21 15-22 Item No Abbreviation for display Rotation Print Item Table Item No Commodity name and Grade line Font Size Table Item No Title of Packing date Item No Weight Item No Title of Tare Item No Address Item No Nutrition Item No Coded Time Bar Code Format Setting UPC# Bar Code Format Setting Screen Irregular Weight Memory Card Operation Touch the Clear File in Scale memory key Save/Load Operation Save Make FolderSelect Item Load Select ALL SaveLoad Check CAP Memory Card Format Memory Card Operation screen Clear File in Scale MemoryClear Slot Memory Card Copy PLU Data Maintenance Auto Code UPC Code Mode FlagTouch the Weigh, Fix price, or By count key Safe Handling Logo 1/Logo 2/LogoFSP Logo Coupon Logo Hint Grade LineIngredient Recipe Nutrition factsAddress Touch the FSP Schedule key 13 +TaxFSP Schedule FSP Discount Bonus Logo FSP Discount %Tare Password Assignment Wireless LAN Used to save the entered data Wireless LAN Setup Ascii Ping Wireless LAN Status CheckReload Registration Mode Date/Time key Preset count keySave key For key Programming for the Registration Mode Print Item Selection Used to return to the Registration Mode initial screen Label Format Selection Mode Change PLU Library Commodity Name Search Example LAST20 Temporary Date Change Special Information Assignment Temp , Coupon Temp , or Bonus Temp key Logo Assignment Grade Line Assignment Scrolling Message Setting Store Name/Address Assignment Dark Operation Panel Brightness AdjustmentLight Basic Operations Zero Count Setting Calling a PLU Calling a PLU by using the Speed KeyCalling a PLU by entering a PLU No Calling a PLU from the PLU Library Weighing Commodities and Issuing Labels Unknown Tare Subtraction Tare Subtraction/Cancellation/SaveKnown Tare Subtraction Preset Tare Subtraction Tare Subtraction Preset %Tare Subtraction Input a new %tare and touch the %TARE key. Example 10% Vendor Log-in Void 16-25 When changing the unit price preset to the PLU When the PLU has no unit priceUnit Price Set and Change Unit price per 1lb Unit price per 1/2lb Changing the Unit of Weight CA model only Label Issue Count Setting Speed Key Screen Change Test Print By-Count Operation When Using the Quantity Preset to the PLU No data is changed Changing the Quantity and the Unit Price Preset to the PLU Changing the Unit Price Changing the Selling Quantity and Unit Price 16-35 EO1-31009 By-Count Operation During printing Completion of the printing Fix Price Operation US model only Issuing Net Weight Statement Label US model only Changing the price and net weight preset to the PLU On the normal condition e.g. Boneless Stew Meat Sales Promotion Conditions Average Portion Cost Entered quantity is displayed under the commodity name Operator’s Hint Registration Mark Down Mode Registration Rewrap Mode REPORT/RESET Mode Report Title Label Mode Total Memory Report/Reset Rewrap Weight OrderVendor Total Normal Touch the PLU Order or UPC Order key Touch the NORMAL, REWRAP, or Markdown keyTouch the ALL, Zero SKIP, ZERO, Best or Worst key 100’ Hourly Total Vendor Total Vendor Total screen PLU Total Report Grand Total ReportDepartment Total Report 100’ Hourly Total Report Hourly Total ReportVendor Total Report 19-11 19-12 Programmed Data Report How to enter the Programmed Data Main Menu 19-14 19-15 19-16 Store NAME/ADDRESS Message Scrolling Message Link PROMOTION/TIME Schedule Combination Report Report Printing ProcedureList Combination Report Confirming Procedure How to confirm the contents of Combination Reports YES How to enter the Total Data Transmission Main MenuKey Functions and Procedure Total Data Transmission Training Mode Sleep Mode DEMO0.BMP, DEMO1.BMP, DEMO2.BMP, DEMO3.BMP, DEMO4.BMP Slide Show ModeDemo Phenomenon Cause Solution TroubleshootingBefore You Call for Service Error Message Cause Solution Error Message Table Error Message Cause Solution Error Message Cause Solution Page