Toshiba SL-5300 Series owner manual Input a value Touch the X or Y area, Format Image Screen

15. SET UP MODE			EO1-31009
			15.2 Label Format Setting
	Item		Procedure
	X, Y	1. Input a value.
		2. Touch the X or Y area.
		NOTES:
		1.	Programmable value range depends on the format No. or Item. (Unit:
		0.125 mm)
		2.	The position indicated by X and Y is the lower left corner of a print item.

Format Image Screen

When the Item area of the Free Format Setting screen is touched, the following screen will appear. You can change the print items’ positions while checking the print image.

Item Name

The name of adjusting item Format No. is displayed.

Type

Explanation area

Line ct.

Angle

Logo size

Cursor key

Format image area The frame of adjusting item is colored blue at home position.

Address

When the item except address is moved to this area, then item is printed on only 2nd. Label in case 2 pieces print.

	FORMAT PRINT key	ROTATION key
	Cursor key	LAST ITEM key
	NEXT ITEM key
No	Selected label format No.
Item	Selected print item
Type	Selected print item’s format type
Exp	Explanation of the format type
x (mm)	X (horizontal) position of the print item’s lower left corner
y (mm)	Y (vertical) position of the print item’s lower left corner
Line ct	The number of Ingredient lines
angle	Rotation
Logo size (dot)	Size of logo print
	If the logo data is larger than specified size, the part outside the specified size will
	not be printed.

15- 7