| 14. PROGRAMMING MODE |
| ||
|
|
| 14.5 Nutrition Facts Setting | |
|
|
|
|
|
| Procedure |
|
|
|
| Item |
| Procedure |
|
| Changing the title of | 1. | Touch the nutrition area to be changed. |
|
| nutrition | 2. | The edit screen will appear. |
|
|
| 3. | Input a new title. (Max. 20 characters) |
|
| Changing the unit of | 1. | Touch the unit of measure area to be changed. |
|
| measure | 2. | The edit screen will appear. |
|
|
| 3. | Input a new unit. (Max. 2 characters) |
|
| Changing the necessary | 1. | Input the numeric data. (0 – 9999 or 0.0 – 99.9) |
|
| daily value | 2. | Touch the daily value area. |
|
| Adding a new nutrition | 1. | Touch a vacant area. |
|
|
| 2. | Enter a new title on the edit screen. |
|
|
| 3. | Touch its unit of measure area. |
|
|
| 4. | Enter a unit on the edit screen. |
|
|
| 5. | Touch its daily value area. |
|
|
| 6. | Input a numeric data. (0 – 9999 or 0.0 – 99.9) |
|
NOTE: The title and the unit of measure for Vitamin A, Vitamin C, Calcium, Iron, and Protein cannot be changed.
14.5.7 Footnote Setting
With the initial settings, the footnote setting is not available. To use this function, contact your nearest TOSHIBA TEC service representative or sales agent.
The following screen will appear when the [Footnote] key of the Nutrition Facts Programming screen is touched.
Numeric 1 area
Numeric 2 area
Procedure
Item |
| Procedure |
Entering Footnote 1 | 1. Input a numeric data. (0 – 99999) | |
| 2. | Touch the left side data entry area. |
| NOTE: For Calories, the effective value is 0 – 9999. Refer to the Reference | |
| Values for Nutrition Labeling table. | |
Entering Footnote 2 | 1. | Input a numeric data. (0 – 99999) |
| 2. | Touch the right side data entry area. |
| NOTE: For Calories, the effective value is 0 – 9999. Refer to the Reference | |
| Values for Nutrition Labeling table. | |
14- 25
