1.4.9 AT^SSTGI Remote-SAT Get Information – Play Tone (32)
Write command
AT^SSTGI=32
This command is to be used upon receiving an unsolicited result code ^SSTN:32.
The ME has been instructed to generate an audible tone, and may pass to the TA some information to support this.
Text and an Icon Identifier are passed to the TA for display to the user.
Response
^SSTGI: <cmdType>, <commandDetails>, <infoText>>, <tone>, <durationUnit>, <duration>, <iconQualifier>, <iconId> <CR> <LF>
Parameters |
|
<cmdType> | 32 – Proactive command ID, see Table 1. |
<commandDetails> This byte is RFU. | |
<infoText> | String to accompany tone |
<tone> | Tone that the ME generates |
Standard supervisory tones: | |
01 | Dial tone |
02 | Called subscriber busy |
03 | Congestion |
04 | Radio path acknowledge |
05 | Radio path not available / Call dropped |
06 | Error / Special information |
07 | Call waiting tone |
08Ringing tone
ME proprietary tones:
10General beep
11Positive acknowledgement tone
12Negative acknowledgement or error tone
<durationUnit>
0Minutes
1Seconds
2Tenths of Seconds
<duration> |
| Duration of tone, expressed in units |
<iconQualifier> | Unsigned Integer, range 0 – 255, used as a bitfield. | |
bit 1: | 0 | icon is self explanatory and replaces text |
| 1 | icon is not |
|
| the text. Determined value only if associated icon id is not |
|
| 0 (an icon exists). |
bits |
| RFU |
<iconId> |
|
Reference | Note |
Siemens | Command is issued if the SIM application requests playing a tone with a length |
| more than 5 seconds. |
|
|
MC35_SAT_01_v02.00 | Page 32 of 65 | 11.01.2002 |