Siemens MC35 manual Atsstgi Remote-SAT Get Information Send SS, ATSSTGI=17

Remote-SAT User's Guide

1.4.5 AT^SSTGI Remote-SAT Get Information – Send SS (17)

Write command

AT^SSTGI=17

This command is to be used upon receiving an unsolicited result code ^SSTN:17.

The module is sending a supplementary service request to the network, and is alerting the user of this. Text and an Icon Identifier can be passed to the TA to display to the user.

Text and an Icon Identifier can be passed to the TA to display to the user.

Response

^SSTGI: <cmdType>, [<commandDetails>], [<text>], <iconQualifier>, <iconId>, <CR>, <LF>

Parameters
<cmdType>	17 – Proactive command ID, see Table 1
<commandDetails>	This byte is RFU.
<text>	String
<iconQualifier>	Unsigned Integer, range 0 – 255, used as a bitfield.
	bit 1:	0 = icon is self explanatory and replaces text
		1 = icon is not self-explanatory and shall be
		displayed with the text
		Determined value only if associated icon id is
		not 0 (an icon exists).
	bits 2-8: = RFU
<iconId>	0-255, 0: no icon

ReferenceNote

Siemens

MC35_SAT_01_v02.00 Page 28 of 65 11.01.2002