PowerConnect 5500 Series Release Notes
| In User Guide for PC55xx there is a list of protocols that |
| |
| can be used during ACL configuration. |
| |
| On that list RDP is described as: |
| |
| RDP — Remote Desktop Protocol (RDP). Enables a |
| |
| clients to communicate with the Terminal Server over |
| |
PC55xx - Incorrect | the network |
| |
If you are in switch CLI and under IP ACL configuration |
| ||
documentation in | User Guide | ||
this is what is listed for RDP: | |||
relation to RDP and ACL |
| ||
RDP - Reliable Data Protocol |
| ||
|
| ||
| Therefore, in UG: should change from Remote Desktop |
| |
| Protocol |
| |
| To : Reliable Data Protocol (27) |
| |
|
|
| |
| User Guide provides command "ip https server" as |
| |
Mistake in PC55xx User | example for HTTPS enabling. Command should be "ip |
| |
http |
| ||
Guide regarding enable | User Guide | ||
See page 75 of UG | |||
HTTPS command |
| ||
|
| ||
|
|
| |
| Dell request to update recommended HDMI cable |
| |
55xx HDMI | version to 1.4 (it is currently 1.3a) |
| |
This is due to Dell getting a lot of reports from the field | User Guide | ||
documentation | |||
when using cable 1.3A - and problems were resolved |
| ||
|
| ||
| when using cable 1.4 |
| |
55XX ip | IP source guard (interface level) command appears in |
| |
PC55xx CLI guide - although it is not supported on | CLI Guide | ||
command is not present | |||
device - need to remove command from CLI Guide |
| ||
|
|
End of Release Notes
System Firmware Version 4.1.0.1 | Subject to Change Without Notice | Page 6 |