Onkyo TX-NR1007 Using the Onscreen Setup Menus, Using the Display to change the settings, display

First Time Setup—Continued

RECEIVER

qwer

ENTER

SETUP

Using the Onscreen Setup Menus

Carry out the settings for the AV receiver by using the Onscreen Setup Menu.

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
	Menu
	1. Input/Output Assign
	2. Speaker Setup
	3. Audio Adjust
	4. Source Setup
	5. Listening Mode Preset
	6. Miscellaneous
	7. Hardware Setup
	8. Remote Controller Setup
	9. Lock Setup
	Tip:
	On several functions, the explanation
	will be displayed under the screen.
2	Use the Up and Down [q]/[w] but-

tons to select item and then press [ENTER].

The submenu appears.

Press the [SETUP] button to close the menu.

Press the [RETURN] button to return to the previous menu.

Using the Display to change the settings

The settings of the AV receiver can be changed using the Display.

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.
	The main menu item appears on the
	display.

2 Use the Up and Down [q]/[w] but- tons to select item and then press [ENTER].

The submenu item appears on the display.

Press the [SETUP] button to close the menu.

Press the [RETURN] button to return to the previous menu.

Onscreen Setup Menus and Display

As each item in the Onscreen Setup Menus is selected, the selected items will be displayed one by one.

Onscreen Setup Menus

Menu

1.Input/Output Assign

2.Speaker Setup

3.Audio Adjust

4.Source Setup

5.Listening Mode Preset

6.Miscellaneous

7.Hardware Setup

8.Remote Controller Setup

9.Lock Setup

Display

Note:

During Audyssey MultEQ® XT Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear in the Display.

46