Onkyo TX-NR1007 instruction manual Connecting a VCR or DVD Recorder for Playback

Connecting the AV receiver—Continued

Connecting a VCR or DVD Recorder for Playback

Hint!

With this hookup, you can use your VCR’s tuner to listen to your favorite TV programs via the AV receiver, useful if your TV has no audio outputs.

Step 1: Video Connection

Choose a video connection that matches your VCR or DVD recorder ( A , B , or C ), and then make the connection.

You must connect the AV receiver to your TV via the same type of connection.

Step 2: Audio Connection

Choose an audio connection that matches your VCR or DVD recorder ( a , b , or c ), and then make the connection.

•With connection , you can listen to the VCR or DVD recorder in Zone 2 or Zone 3.

•To enjoy Dolby Digital and DTS, use connection or . (To listen in Zone 2 or Zone 3 as well, use and , or and .)

Connection		AV receiver	Signal flow	VCR or DVD recorder
	A	COMPONENT VIDEO IN 2 (CBL/SAT)	⇐	Component video output
		VCR/DVR IN S	⇐	S-Video output
	C	VCR/DVR IN V	⇐	Composite video output
		VCR/DVR IN L/R	⇐	Analog audio L/R output
	b	DIGITAL COAXIAL IN 2 (VCR/DVR)	⇐	Digital coaxial output
		DIGITAL OPTICAL IN 1 (GAME)	⇐	Digital optical output

.

A

b	c	C
	a	B

When you use connection c , you need to assign the digital audio input (see page 51).

When you use connection A , you need

to assign the component video input (see page 50).

L R

COAXIAL	OPTICAL	AUDIO	S VIDEO	VIDEO	Y	PB	PR
OUT	OUT	OUT	OUT	OUT	COMPONENT VIDEO OUT

VCR or DVD

recorder

33