! IMPORTANT !
The EPA certified
RBRC® Battery
Installation | Recycling Seal on |
| |
| the |
| |
| RadioShack is voluntarily |
| participating in an industry |
| program to collect and recycle |
| these batteries at the end of |
| their useful life, when taken out |
| of service in the United States |
| or Canada. The RBRC program |
| provides a convenient |
| alternative to placing used Ni- |
| Cd batteries into the trash or the |
| municipal waste stream, which |
| may be illegal in your area. |
| Please call |
| |
| information on |
| recycling and disposal bans/ |
| restrictions in your area. |
| RadioShack’s involvement in |
| this program is part of the |
| company’s commitment to |
| preserving our environment and |
| conserving our natural |
| resources. |
! IMPORTANT !
Be sure the battery pack is properly connected before you try to charge it. The CHARGE/IN USE indicator lights when the handset is on the base, even if the battery pack is not connected.
6.Plug the adapter into a standard AC outlet. And plug the modular cord’s other end into a modular phone line jack.
7.Raise the antenna to a vertical position.
SETTING THE VISUAL RINGER BRIGHTNESS
The VISUAL RINGER switch allows you to set the brightness of the visual ringer LED on the base. There are three options to choose from: HIGH, LOW and OFF. If you set the switch to off, visual ringer LED never flashes.
CONNECTING/CHARGING THE BATTERY PACK
The phone comes with a rechargeable nickel- cadmium battery pack in the handset, but not connected. Before using your phone, you must connect the battery pack. Then charge it for about
1.Press down and slide off the battery compartment cover.
2.Lift the battery pack out of the compartment.
3.Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Then place the battery pack in the compartment.
4.Replace the cover.
To charge the battery pack, place the handset on
the base. Theindicator on the base lights. !
10
