Radio Shack 43-3577 owner manual Changing the Auto Talk and Cidcw, Entering Your Area Code

Changing the Auto Talk and CIDCW

1.When the phone is in standby mode, press

MENU.

2.Use RING/VOL/+ or RING/VOL/- to move the pointer to the selection that you would like to change. Press SELECT to toggle between ¨On¨ and ¨Off¨ for Auto Talk and CIDCW.

3.Press MENU and return the handset to the base unit to complete the setting. The handset returns to the standby mode.

Entering Your Area Code

If you enter a three-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires ten-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full ten-digit number.

1.When the phone is in the standby mode, press MENU.

2.Press RING/VOL/- twice to select ¨Area Code¨.

3.Press SELECT.

4.Use the number keys (0 - 9), or DEL/CH to enter the three-digit area code. Ô

5.Press SELECT. A confirmation tone sounds and the displayed area code is entered.

6.Press MENU or return the handset to the base unit to complete the setting. The handset returns to the standby mode.

Setting the Language

1.When the phone is in the standby mode, press MENU.

Ô NOTE Ô

When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the DEL/CH and number keys to enter the new area code. Then press SELECT. A confirmation tone sounds. To complete the setting, press MENU or return the handset to the base unit.

Operation

17