VIERA LinkTM Connections
Follow the connection diagrams below for HDAVI control of a single piece of AV equipment such as a DVD recorder (DIGA), RAM theater, or Player theater system.
Refer to page
•Optional HDMI and/or optical cables are not included.
If connection (or setting) of equipment compatible with HDAVI control is changed, switch the power of this unit Off and On again while the power of all equipment is On (so that the unit can correctly recognize the connected equipment) and check that DVD recorder (DIGA), RAM theater, and Player theater playback operate.
Note
HDMI 1 is recommended.
When connecting to HDMI 2/HDMI 3, set the input mode to HDMI 2/HDMI 3 (p. 20) initially before connecting to | |
HDMI 2/HDMI 3. After connection, confirm the HDMI control functions (p. | |
■Connecting this unit to the DVD recorder (DIGA), RAM | ■Connecting this unit to a DVD |
theater, or Player theater | recorder (DIGA) AV amp |
For DVD recorder (DIGA): Connect with HDMI cable
For RAM theater and Player theater: Connect with the HDMI and audio cables.
If audio cable is not connected, you cannot listen to the TV program through the theater system.
Digital Audio out
|
| AUDIO |
|
|
|
1 |
|
|
|
|
|
COMPONENT | R | L | PR | PB | Y |
IN |
|
|
|
|
|
2 | R | L | PR | PB | Y |
Back of the TV | VIDEO 1 |
|
|
| IN | R | L |
|
|
PROG | AUDIOTO |
|
| S VIDEO |
OUT | AMP | R | L |
|
|
|
| AUDIO | VIDEO |
When using an “VIERA Link” audio- video amplifier and a compatible DVD recorder (DIGA) use a daisy chain connection as shown below.
HDMI 1 | HDMI 2 |
or
oror
|
|
|
|
| HDMI cable |
AUDIO | HDMI | HDMI | HDMI | HDMI | HDMI |
IN | (AV OUT) | (AV OUT) | (AV OUT) | (AV OUT) | (AV IN) |
or |
RAM theater / | HD Camcorder | DVD recorder (DIGA) | AV amp with VIERA | DVD recorder (DIGA) |
Player theater with | with VIERA Link | with VIERA Link function | Link function | with VIERA Link function |
VIERA Link function | function |
|
|
|
One AV amp and one DVD recorder (DIGA) can be operated with this unit.
Be sure to connect the AV amp between this unit and the DVD recorder (DIGA).
■Setting of this unit after connection
After making connections as shown above, set “VIERA Link” (under “VIERA Link setting”) to “On” using the Setup menu. (p. 21,
Note
Individual HDMI equipment may require additional menu settings specific to each model. Please refer to their respective operating instruction manuals.
When audio from other equipment connected to this unit via HDMI is output using “DIGITAL AUDIO OUT” of this unit, the system switches to 2CH audio.
(When connecting to an AV amp via HDMI, you can enjoy higher sound quality.)
About HDMI cable for connecting Panasonic HD camcorder, read the manual of the equipment.
38
