Radio Shack 43-3577 owner manual Erasing a Stored Name and Phone Number

6.Press SELECT. The cursor flashes indicating that the display is ready for the number to be edited.

7.Use the number key, /TONE/ , #/ , REDIAL or DEL/CH to edit the phone number. The phone number cannot exceed 20 digits.

If you don’t want to change the phone number, skip this step.

8.Press SELECT. If you changed either name or phone number, a confirmation display shows up. If it is correct, press RING/VOL/+ to select “Yes” and press SELECT. You hear a confirmation tone. The memory storage is complete.

For example, if you store a name and number into memory location number 1, the display shows ¨Memory 1 Stored¨. After about two seconds, Select Memory screen is displayed.

9.Press MEM to return to the standby mode.

ERASING A STORED NAME AND PHONE NUMBER

1.Press MEM. ¨Select Memory¨ is displayed.

2.Press RING/VOL/+ or RING/VOL/-, or enter a number (0 - 9) to select the memory location you would like to erase.

3.Press SELECT.

The screen appears with the memory location number that you have selected in the display.

4.Press SELECT.

5.Press RING/VOL/- to move the pointer down to ¨Delete Memory X¨.

6.Press SELECT. The confirmation screen appears.

Memory Dialing

23