TONE DIALING SWITCH-OVER
Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can
Initially make your call with the pulse dialing mode. Once your call connects, press the 
/ TONE/ 
key. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within five minute.
SELECTING A DIFFERENT
CHANNEL
If you encounter interference while using your phone, you can manually change the phone´s channel for clear operation. This function works only when the phone is in use. Press DEL/CH.
¨Scanning¨ appears on the display, indicating the phone is changing to another channel.
PAGE
To locate the handset (while it’s off the base), press PAGE on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key or the handset is returned to the base. Ô
Ô NOTES Ô
Tone Dialing
•The tone feature only applies when the dial mode is set to pulse.
•This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 22.)
Page
You can cancel paging also by pressing the PAGE on the base.
Operation
15
