
8Cursor buttons u / d / j / i, ENTER
Select and adjust the sound field program parameters or the “SET MENU” parameters.
9RETURN
Returns to the previous menu level when adjusting the “SET MENU” parameters.
0TRANSMIT indicator
Flashes while the remote control is sending infrared signals.
ASTANDBY
Sets this unit to the standby mode (see page 31).
BPOWER
Turns on this unit (see page 31).
CSLEEP
Sets the sleep timer (see page 41).
DMULTI CH IN
Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 44).
EVOLUME +/–
Increases or decreases the volume level.
FComponent selector switch
Selects the operation mode of the remote control buttons in the shaded area.
AMP
Operates this unit.
SOURCE
Operates the component selected with an input selector button (see page 100).
TV
Operates the TV assigned to either DTV/CBL or PHONO (see page 99).
Notes
•To set the remote control codes for other components, see page 101.
•When you set the remote control codes for both DTV/CBL and PHONO (see page 101), priority is given to the one set for DTV/CBL.
GMUTE
Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 40).
HSTRAIGHT (EFFECT)
Turns the sound field programs off or on. When the “STRAIGHT” mode is selected,
CONTROLS AND FUNCTIONS
INIGHT
Turns on or off the night listening modes (see page 40).
JSET MENU
Enters “SET MENU” (see page 85).
KON SCREEN
Selects the
INTRODUCTION
7