AUTO SETUP
4Press u / d to select “SETUP” and then press j / i to select the desired setting.
PRESET/CH |
|
| PRESET/CH |
ENTER |
|
| ENTER |
Choices: AUTO, RELOAD, UNDO, DEFAULT
•Select “AUTO” to automatically run the entire “AUTO SETUP” procedure.
•Select “RELOAD” to reload the last “AUTO SETUP” settings and override the previous settings.
•Select “UNDO” to undo the last “AUTO SETUP” settings and restore the previous settings.
•Select “DEFAULT” to reset the “AUTO SETUP” parameters to the initial factory settings.
Note
“RELOAD” or “UNDO” is available only when you have previously run “AUTO SETUP” and confirmed the results.
5Press d to select “START” and then press
ENTER to start the setup procedure.
Loud test tones are output from each speaker and “WAITING” appears in the OSD during the “AUTO:CHECK” procedure. Once all items are set, the “RESULT:EXIT” display appears in the OSD.
PRESET/CH |
|
| PRESET/CH |
ENTER |
|
| ENTER |
The display changes as follows.
1 AUTO:MENU
SETUP;;;;;;;AUTO
.
Automatic processing of all items
p | p |
1 AUTO:CHECK
INITIALIZING
.
SIZE/DISTANCE
EQUALIZING
LEVEL
CHECK CH=CENTER
;;;;;;;; p
RESULT:EXIT
. WARNING (3) RESULT
. SP : 5/4/0.1
. DIST: 14.0/ 17.0ft
. LVL :
>SET CANCEL
p | p |
The results displayed under “RESULT” are as follows:
Number of speakers SP
Displays the number of speakers connected to this unit in the following order: Front/Back/Subwoofer
Speaker distance DIST
Displays the speaker distance from the listening position in the following order:
Closest speaker distance/Farthest speaker distance
Speaker level LVL
Displays the speaker output level in the following order:
Lowest speaker output level/Highest speaker output level
34
