Requirements for Entering IPv6 Addresses | NETGEAR (LG2200D)

U.S. Cellular® 4G LTE™ Router (LG2200D)

IPv6

You can use this feature to set up an IPv6 Internet connection type if genie does not detect it automatically.

To set up an IPv6 Internet connection type:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED > Advanced Setup > IPv6.

5.In the Internet Connection Type list, select the IPv6 connection type. Your Internet service provider (ISP) can provide this information.

•If your ISP did not provide details, you can select IPv6 Tunnel.

•If you are not sure, select Auto Detect so that the router detects the IPv6 type that is in use.

•If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, select Auto Config.

For more information about Internet connection types, see the following sections.

6.Click the Apply button. Your changes take effect.

Requirements for Entering IPv6 Addresses

IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. Any four-digit group of zeros within an IPv6 address can be reduced to a single zero or altogether omitted.

The following errors invalidate an IPv6 address:

Set Up an Ethernet WAN Internet Connection

121

Image 121

NETGEAR (LG2200D) user manual Requirements for Entering IPv6 Addresses,  To set up an IPv6 Internet connection type

Contents

Cellular 4G LTE Router LG2200D Trademarks SupportCompliance Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Unpack Your Router Check the package contents Front Panel Signal Power Internet LAN USB WAN WiFi WPS Quality Cellular 4G LTE Router LG2200D LED and button descriptions Rear Panel Find the Best Spot for Your Router Attach the Antennas To attach the antennas  To position your router  To seat a SIM card Seat a SIM Card Connect to the Network Access the Router WiFi Connection Wired Connection To find and select the WiFi network  To use WPS to connect to the WiFi network Use an Internet Browser to Access the Router Types of LoginsLabel  To log in to the router Specify Your Internet Settings  To use the Setup Wizard Use the Internet Setup WizardSelect Advanced Setup Wizard  To view or change the settings Specify Mobile Broadband Internet SettingsSelect Mobile Internet Roaming automatically  To enable or disable the SIM card PIN code SIM Card PIN Code SettingsSelect Advanced Advanced Setup SIM Settings  To change the SIM card PIN code Control Access to the Internet Parental Controls  To set up Live Parental ControlsSelect Parental Controls Control Access to the Internet Use Keywords to Block Internet Sites  To set up keyword blockingClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block Sites  To block services Block Services from the InternetSelect Advanced Security Block Services Control Access to the Internet  To schedule blocking Schedule When to Block Internet Sites and ServicesSelect Advanced Security Schedule  To set up email notifications Set Up Security Event Email NotificationsAvoid Blocking on a Trusted Computer  To specify a trusted computer Control Access to the Internet Port Forwarding to Permit External Host Communications  To forward specific incoming protocols Set Up Port Forwarding to a Local Server  To add a custom service Add a Custom Port Forwarding ServiceClick the Add Custom Service button Delete a Port Forwarding Entry Edit a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry How the Router Implements the Port Forwarding Rule Application Example Make a Local Web Server Public To make a local web server public Add a Port Triggering Service Set Up Port Triggering To add a port triggering service  To enable port triggering Enable Port Triggering Application Example Port Triggering for Internet Relay Chat Clear the Disable Port Triggering check box Control Access to the Internet Specify Network Settings  To view the WAN settings View WAN SettingsSelect Advanced Setup WAN Setup Change the MTU Size  To change the MTU size Set Up a Default DMZ Server Change the Router’s Device Name  To set up a default DMZ server To change the router’s device name Select Advanced Setup LAN Setup Change the LAN TCP/IP Settings To change the LAN TCP/IP settings LAN IP address Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns  To disable the Dhcp server feature in the router Disable the Dhcp Server Feature in the RouterReserve LAN IP Addresses  To edit a reserved address entry  To reserve an IP address To delete a reserved address entry WMM QoS for Wireless Multimedia Applications Quality of Service Setup To disable WMM QoS Select Advanced Setup QoS Setup Select the Turn Internet Access QoS On check box Set Up QoS for Internet Access To create a QoS policy for applications and online games Specify Network Settings Click the Add Priority Rule button QoS for a Router LAN Port Click Add Priority Rule QoS for a MAC Address  To edit a QoS policy Select Advanced QoS Setup To delete a QoS policy Specify Basic WiFi Settings Use the WPS Wizard for WiFi Connections To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option Use the WiFi On/Off Button Control the Wireless RadiosEnable or Disable the Wireless Radios  To enable or disable the wireless radios Set Up a Wireless ScheduleSelect Advanced Advanced Setup WiFi Settings  To set up the wireless schedule  To specify WPS Settings Specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario  To set up the base station Set Up the Base Station  To configure a Netgear router as a repeater Set Up a Repeater Specify Network Settings USB Storage  To connect a USB storage device Access a USB Storage Device To map the USB device to a Windows network drive  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computer Share Photos File-Sharing ScenariosStore Files in a Central Location for Printing  To share files with your friends and family Share Large Files over the Internet View a USB Device Attached to the Router To view basic information about the USB storage device  To view or change the USB storage advanced settings USB Storage Device Network and Access SettingsSelect Basic ReadySHARE Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced Settings  To view network folders Available Network Folders Select Advanced ReadySHARE  To add a network folderClick the Create Network Folder button  To edit a network folder Specify Approved USB Devices  To set up approved USB devices Safely Remove a USB Drive Select USB Storage Basic SettingsSelect the Allow only approved devices check box  To remove a USB disk drive safely ReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer Netgear USB Control Center utility USB Control Center Utility USB Printer Control Center Configuration Printers and Faxes screen Scan with a Multifunction Printer Administration  To check for new firmware and update your router Update the Router FirmwareSelect Advanced Administration Router Update  To upgrade the LTE modem software LTE Modem UpgradeSelect Advanced Administration LTE Modem Upgrade  To set the admin password Change the admin PasswordSelect Advanced Administration Set Password  To set up password recovery Recover the admin Password To recover your password  To reboot the router Reboot the RouterView Router Status  To view router status and usage information Modem Identity Select Advanced Administration Router Status View Mobile Broadband Status IP Subnet Mask Wireless PortConnection Status Gateway IP Address LAN Port Select Advanced  To view statistics for the Internet connection Show Statistics  To view the Attached Devices screen View Devices Currently on the NetworkSelect Attached Devices View Logs of Router Activity Select Advanced Administration Logs To view logs Back Up the Configuration Settings Manage the Configuration File To back up the router’s configuration settings Select Advanced Administration Backup Settings Erase the Current Configuration Settings Restore Configuration Settings To restore configuration settings that you backed up Do not interrupt the reboot process Select Advanced Advanced Setup Static Routes  To set up a static routeStatic Routes  To edit a static route Remote Management  To set up remote management To delete a static route Administration 104 Universal Plug and Play  To specify Universal Plug and Play settings  To monitor Internet traffic Monitor Internet Traffic Click Advanced Advanced Setup Traffic Meter  To run the diagnostics DiagnosticsSelect Advanced Administration Diagnostics Administration 109 Troubleshooting Power LED Stays Amber Power LED Is Off or BlinkingTroubleshoot with the LEDs LEDs Never Turn Off Cannot Log In to the Router WiFi LED Is OffInternet LED Is Off Forgotten WiFi Password Problems with Date and Time Troubleshoot Your Network Using the Ping Utility WiFi ConnectivityTest the LAN Path to Your Router  To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection Cable a WAN Ethernet Internet Connection  To install the router with an Ethernet Internet connection Advanced Internet Setup Specify the Internet Connection ModeSelect Advanced Setup Broadband Settings  To change the Internet setup Select Advanced Setup Internet Setup Internet IP Address Internet Service Provider. PPPoE or PPPoA Select Advanced Advanced Setup IPv6  To set up an IPv6 Internet connection typeIPv6 Requirements for Entering IPv6 Addresses Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125  To set up a fixed IPv6 Internet connection  To set up a pass-through IPv6 Internet connectionIPv6 Pass Through IPv6 Fixed Set Up an Ethernet WAN Internet Connection 127 IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection Connect to the Internet Troubleshoot an Ethernet WAN Internet Connection Troubleshoot Internet Browsing Supplemental Information Factory default settings Factory Settings Supplemental Information 134 LG2200D Router specifications Technical Specifications