Technical Specifications | NETGEAR (LG2200D) manual

U.S. Cellular® 4G LTE™ Router (LG2200D)

Technical Specifications

Table 4. LG2200D Router specifications

Feature	Description

Data and routing protocols	TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
	and SMB

Power adapter	North America: 120V, 60 Hz, input
	12 V DC @ 2.5A, output
Dimensions	Without antennas:172.7 mm x 24.6 mm x 132.4 mm
	With antennas: 172.7 mm x 226.5 mm x 163.5 mm

Weight	Without antennas: 325 g
	With antennas: 380 g

Operating temperature	0° to 40° C (32º to 104º F)

Operating humidity	90% maximum relative humidity, noncondensing

Electromagnetic emissions	N/A

LAN	10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45

WAN	10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45

Wireless	Maximum wireless signal rate complies with the IEEE 802.11 standard. For more
	information, see the footnote for the previous table.

Radio data rates	Auto Rate Sensing

Data encoding standards	IEEE 802.11ac 2.0
	IEEE 802.11n version 2.0
	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
	IEEE 802.11n, IEEE 802.11a 5.0 GHz

Maximum computers per	Limited by the amount of wireless network traffic generated by each node
wireless network	(typically 50–70 nodes).
Operating frequency range	2.412–2.462 GHz (US)
	2.412–2.472 GHz (Japan)
	2.412–2.472 GHz (Europe ETSI)
802.11 security	WPA-PSK, WPA2-PSK, and WPA/WPA2

Supplemental Information

135

Image 135

NETGEAR (LG2200D) user manual Technical Specifications, LG2200D Router specifications

Contents

Cellular 4G LTE Router LG2200D Support TrademarksCompliance Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Unpack Your Router Check the package contents Front Panel Signal Power Internet LAN USB WAN WiFi WPS Quality Cellular 4G LTE Router LG2200D LED and button descriptions Rear Panel Attach the Antennas Find the Best Spot for Your Router To attach the antennas  To position your router  To seat a SIM card Seat a SIM Card Connect to the Network Access the Router  To use WPS to connect to the WiFi network Wired ConnectionWiFi Connection  To find and select the WiFi network  To log in to the router Types of LoginsUse an Internet Browser to Access the Router Label Specify Your Internet Settings Use the Internet Setup Wizard  To use the Setup WizardSelect Advanced Setup Wizard Roaming automatically Specify Mobile Broadband Internet Settings To view or change the settings Select Mobile Internet SIM Card PIN Code Settings  To enable or disable the SIM card PIN codeSelect Advanced Advanced Setup SIM Settings  To change the SIM card PIN code Control Access to the Internet  To set up Live Parental Controls Parental ControlsSelect Parental Controls Control Access to the Internet  To set up keyword blocking Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block Sites Block Services from the Internet  To block servicesSelect Advanced Security Block Services Control Access to the Internet Schedule When to Block Internet Sites and Services  To schedule blockingSelect Advanced Security Schedule  To specify a trusted computer Set Up Security Event Email Notifications To set up email notifications Avoid Blocking on a Trusted Computer Control Access to the Internet Port Forwarding to Permit External Host Communications  To forward specific incoming protocols Set Up Port Forwarding to a Local Server Add a Custom Port Forwarding Service  To add a custom serviceClick the Add Custom Service button  To delete a port forwarding entry Edit a Port Forwarding EntryDelete a Port Forwarding Entry  To edit a port forwarding entry Application Example Make a Local Web Server Public How the Router Implements the Port Forwarding Rule To make a local web server public Set Up Port Triggering Add a Port Triggering Service To add a port triggering service  To enable port triggering Enable Port Triggering Application Example Port Triggering for Internet Relay Chat Clear the Disable Port Triggering check box Control Access to the Internet Specify Network Settings View WAN Settings  To view the WAN settingsSelect Advanced Setup WAN Setup Change the MTU Size  To change the MTU size Set Up a Default DMZ Server  To set up a default DMZ server Change the Router’s Device Name To change the router’s device name LAN IP address Change the LAN TCP/IP SettingsSelect Advanced Setup LAN Setup  To change the LAN TCP/IP settings Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns Disable the Dhcp Server Feature in the Router  To disable the Dhcp server feature in the routerReserve LAN IP Addresses  To reserve an IP address  To edit a reserved address entry To delete a reserved address entry Select Advanced Setup QoS Setup Quality of Service SetupWMM QoS for Wireless Multimedia Applications  To disable WMM QoS Set Up QoS for Internet Access Select the Turn Internet Access QoS On check box To create a QoS policy for applications and online games Specify Network Settings Click the Add Priority Rule button QoS for a Router LAN Port Click Add Priority Rule QoS for a MAC Address Select Advanced QoS Setup  To edit a QoS policy To delete a QoS policy Select Advanced WPS Wizard Use the WPS Wizard for WiFi ConnectionsSpecify Basic WiFi Settings  To use the WPS Wizard  To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option Control the Wireless Radios Use the WiFi On/Off ButtonEnable or Disable the Wireless Radios  To set up the wireless schedule Set Up a Wireless Schedule To enable or disable the wireless radios Select Advanced Advanced Setup WiFi Settings  To specify WPS Settings Specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario  To set up the base station Set Up the Base Station  To configure a Netgear router as a repeater Set Up a Repeater Specify Network Settings USB Storage Access a USB Storage Device  To connect a USB storage device To map the USB device to a Windows network drive  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computer  To share files with your friends and family File-Sharing ScenariosShare Photos Store Files in a Central Location for Printing View a USB Device Attached to the Router Share Large Files over the Internet To view basic information about the USB storage device USB Storage Device Network and Access Settings  To view or change the USB storage advanced settingsSelect Basic ReadySHARE Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced Settings  To view network folders Available Network Folders  To edit a network folder  To add a network folderSelect Advanced ReadySHARE Click the Create Network Folder button Specify Approved USB Devices  To set up approved USB devices  To remove a USB disk drive safely Select USB Storage Basic SettingsSafely Remove a USB Drive Select the Allow only approved devices check box ReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer Netgear USB Control Center utility USB Control Center Utility USB Printer Control Center Configuration Printers and Faxes screen Scan with a Multifunction Printer Administration Update the Router Firmware  To check for new firmware and update your routerSelect Advanced Administration Router Update LTE Modem Upgrade  To upgrade the LTE modem softwareSelect Advanced Administration LTE Modem Upgrade Change the admin Password  To set the admin passwordSelect Advanced Administration Set Password Recover the admin Password  To set up password recovery To recover your password  To view router status and usage information Reboot the Router To reboot the router View Router Status Modem Identity Select Advanced Administration Router Status Gateway IP Address LAN Port IP Subnet Mask Wireless PortView Mobile Broadband Status Connection Status Select Advanced  To view statistics for the Internet connection Show Statistics View Devices Currently on the Network  To view the Attached Devices screenSelect Attached Devices Select Advanced Administration Logs View Logs of Router Activity To view logs Select Advanced Administration Backup Settings Manage the Configuration FileBack Up the Configuration Settings  To back up the router’s configuration settings Do not interrupt the reboot process Restore Configuration SettingsErase the Current Configuration Settings  To restore configuration settings that you backed up  To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes  To edit a static route  To set up remote management Remote Management To delete a static route Administration 104 Universal Plug and Play  To specify Universal Plug and Play settings  To monitor Internet traffic Monitor Internet Traffic Click Advanced Advanced Setup Traffic Meter Diagnostics  To run the diagnosticsSelect Advanced Administration Diagnostics Administration 109 Troubleshooting LEDs Never Turn Off Power LED Is Off or BlinkingPower LED Stays Amber Troubleshoot with the LEDs WiFi LED Is Off Cannot Log In to the RouterInternet LED Is Off Forgotten WiFi Password Problems with Date and Time  To ping the router from a Windows computer WiFi ConnectivityTroubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection Cable a WAN Ethernet Internet Connection  To install the router with an Ethernet Internet connection  To change the Internet setup Specify the Internet Connection ModeAdvanced Internet Setup Select Advanced Setup Broadband Settings Select Advanced Setup Internet Setup Internet IP Address Internet Service Provider. PPPoE or PPPoA Requirements for Entering IPv6 Addresses  To set up an IPv6 Internet connection typeSelect Advanced Advanced Setup IPv6 IPv6 Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125 IPv6 Fixed  To set up a pass-through IPv6 Internet connection To set up a fixed IPv6 Internet connection IPv6 Pass Through Set Up an Ethernet WAN Internet Connection 127 IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection Connect to the Internet Troubleshoot an Ethernet WAN Internet Connection Troubleshoot Internet Browsing Supplemental Information Factory default settings Factory Settings Supplemental Information 134 LG2200D Router specifications Technical Specifications