Change the LAN TCP/IP Settings, LAN IP address | NETGEAR (LG2200D)

U.S. Cellular® 4G LTE™ Router (LG2200D)

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED > Setup > LAN Setup.

5.In the Device Name field, type a new name.

6.Click the Apply button. Your change is saved.

Change the LAN TCP/IP Settings

The router is preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The router’s default LAN IP configuration is as follows:

•LAN IP address. 192.168.0.1

•Subnet mask. 255.255.255.0

These addresses are part of the designated private address range for use in private networks and are suitable for most applications. If your network requires a different IP addressing scheme, you can change these settings

You might want to change these settings if you need a specific IP subnet that one or more devices on the network uses, or if you have competing subnets with the same IP scheme.

To change the LAN TCP/IP settings:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

Specify Network Settings

46

Image 46

NETGEAR (LG2200D) user manual Change the LAN TCP/IP Settings, Select Advanced Setup LAN Setup, LAN IP address

Contents

Cellular 4G LTE Router LG2200D Trademarks SupportCompliance Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Check the package contents Unpack Your Router Signal Power Internet LAN USB WAN WiFi WPS Quality Front Panel Rear Panel Cellular 4G LTE Router LG2200D LED and button descriptions Find the Best Spot for Your Router Attach the Antennas To attach the antennas  To position your router Seat a SIM Card  To seat a SIM card Connect to the Network Access the Router  To find and select the WiFi network Wired ConnectionWiFi Connection  To use WPS to connect to the WiFi network Label Types of LoginsUse an Internet Browser to Access the Router  To log in to the router Specify Your Internet Settings  To use the Setup Wizard Use the Internet Setup WizardSelect Advanced Setup Wizard Select Mobile Internet Specify Mobile Broadband Internet Settings To view or change the settings Roaming automatically  To enable or disable the SIM card PIN code SIM Card PIN Code SettingsSelect Advanced Advanced Setup SIM Settings  To change the SIM card PIN code Control Access to the Internet Parental Controls  To set up Live Parental ControlsSelect Parental Controls Control Access to the Internet Use Keywords to Block Internet Sites  To set up keyword blockingClick the Take me to the status screen button Select Advanced Security Block Sites  To delete keywords from the list  To block services Block Services from the InternetSelect Advanced Security Block Services Control Access to the Internet  To schedule blocking Schedule When to Block Internet Sites and ServicesSelect Advanced Security Schedule Avoid Blocking on a Trusted Computer Set Up Security Event Email Notifications To set up email notifications  To specify a trusted computer Control Access to the Internet Port Forwarding to Permit External Host Communications Set Up Port Forwarding to a Local Server  To forward specific incoming protocols  To add a custom service Add a Custom Port Forwarding ServiceClick the Add Custom Service button  To edit a port forwarding entry Edit a Port Forwarding EntryDelete a Port Forwarding Entry  To delete a port forwarding entry How the Router Implements the Port Forwarding Rule Application Example Make a Local Web Server Public To make a local web server public Add a Port Triggering Service Set Up Port Triggering To add a port triggering service Enable Port Triggering  To enable port triggering Clear the Disable Port Triggering check box Application Example Port Triggering for Internet Relay Chat Control Access to the Internet Specify Network Settings  To view the WAN settings View WAN SettingsSelect Advanced Setup WAN Setup Change the MTU Size Set Up a Default DMZ Server  To change the MTU size Change the Router’s Device Name  To set up a default DMZ server To change the router’s device name  To change the LAN TCP/IP settings Change the LAN TCP/IP SettingsSelect Advanced Setup LAN Setup LAN IP address Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns  To disable the Dhcp server feature in the router Disable the Dhcp Server Feature in the RouterReserve LAN IP Addresses  To edit a reserved address entry  To reserve an IP address To delete a reserved address entry  To disable WMM QoS Quality of Service SetupWMM QoS for Wireless Multimedia Applications Select Advanced Setup QoS Setup Select the Turn Internet Access QoS On check box Set Up QoS for Internet Access To create a QoS policy for applications and online games Specify Network Settings QoS for a Router LAN Port Click the Add Priority Rule button QoS for a MAC Address Click Add Priority Rule  To edit a QoS policy Select Advanced QoS Setup To delete a QoS policy  To use the WPS Wizard Use the WPS Wizard for WiFi ConnectionsSpecify Basic WiFi Settings Select Advanced WPS Wizard  To specify basic wireless settings Change the WiFi Security Option  To change the WPA settings Use the WiFi On/Off Button Control the Wireless RadiosEnable or Disable the Wireless Radios Select Advanced Advanced Setup WiFi Settings Set Up a Wireless Schedule To enable or disable the wireless radios  To set up the wireless schedule Specify WPS Settings  To specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario Set Up the Base Station  To set up the base station Set Up a Repeater  To configure a Netgear router as a repeater Specify Network Settings USB Storage  To connect a USB storage device Access a USB Storage Device To map the USB device to a Windows network drive  To access the USB drive from a remote computer  To access the USB drive with FTP from a remote computer Store Files in a Central Location for Printing File-Sharing ScenariosShare Photos  To share files with your friends and family Share Large Files over the Internet View a USB Device Attached to the Router To view basic information about the USB storage device  To view or change the USB storage advanced settings USB Storage Device Network and Access SettingsSelect Basic ReadySHARE Select Advanced USB Storage Advanced Settings Network Neighborhood/MacShare. Enabled by default Available Network Folders  To view network folders Click the Create Network Folder button  To add a network folderSelect Advanced ReadySHARE  To edit a network folder  To set up approved USB devices Specify Approved USB Devices Select the Allow only approved devices check box Select USB Storage Basic SettingsSafely Remove a USB Drive  To remove a USB disk drive safely ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer USB Control Center Utility Netgear USB Control Center utility Control Center Configuration USB Printer Scan with a Multifunction Printer Printers and Faxes screen Administration  To check for new firmware and update your router Update the Router FirmwareSelect Advanced Administration Router Update  To upgrade the LTE modem software LTE Modem UpgradeSelect Advanced Administration LTE Modem Upgrade  To set the admin password Change the admin PasswordSelect Advanced Administration Set Password  To set up password recovery Recover the admin Password To recover your password View Router Status Reboot the Router To reboot the router  To view router status and usage information Select Advanced Administration Router Status Modem Identity Connection Status IP Subnet Mask Wireless PortView Mobile Broadband Status Gateway IP Address LAN Port Select Advanced Show Statistics  To view statistics for the Internet connection  To view the Attached Devices screen View Devices Currently on the NetworkSelect Attached Devices View Logs of Router Activity Select Advanced Administration Logs To view logs  To back up the router’s configuration settings Manage the Configuration FileBack Up the Configuration Settings Select Advanced Administration Backup Settings  To restore configuration settings that you backed up Restore Configuration SettingsErase the Current Configuration Settings Do not interrupt the reboot process Select Advanced Advanced Setup Static Routes  To set up a static routeStatic Routes  To edit a static route Remote Management  To set up remote management To delete a static route Administration 104  To specify Universal Plug and Play settings Universal Plug and Play Monitor Internet Traffic  To monitor Internet traffic Click Advanced Advanced Setup Traffic Meter  To run the diagnostics DiagnosticsSelect Advanced Administration Diagnostics Administration 109 Troubleshooting Troubleshoot with the LEDs Power LED Is Off or BlinkingPower LED Stays Amber LEDs Never Turn Off Cannot Log In to the Router WiFi LED Is OffInternet LED Is Off Problems with Date and Time Forgotten WiFi Password Test the LAN Path to Your Router WiFi ConnectivityTroubleshoot Your Network Using the Ping Utility  To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection  To install the router with an Ethernet Internet connection Cable a WAN Ethernet Internet Connection Select Advanced Setup Broadband Settings Specify the Internet Connection ModeAdvanced Internet Setup  To change the Internet setup Select Advanced Setup Internet Setup Internet Service Provider. PPPoE or PPPoA Internet IP Address IPv6  To set up an IPv6 Internet connection typeSelect Advanced Advanced Setup IPv6 Requirements for Entering IPv6 Addresses Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125 IPv6 Pass Through  To set up a pass-through IPv6 Internet connection To set up a fixed IPv6 Internet connection IPv6 Fixed Set Up an Ethernet WAN Internet Connection 127  To set up an IPv6 Internet connection with a Dhcp server IPv6 Dhcp  To set up a PPPoE IPv6 Internet connection IPv6 PPPoE Troubleshoot an Ethernet WAN Internet Connection Connect to the Internet Troubleshoot Internet Browsing Supplemental Information Factory Settings Factory default settings Supplemental Information 134 Technical Specifications LG2200D Router specifications