Front Panel | NETGEAR (LG2200D) guide

U.S. Cellular® 4G LTE™ Router (LG2200D)

Front Panel

The router front panel has buttons and status LEDs. Use the LEDs to verify status and connections.

Signal Power Internet LAN

USB WAN WiFi WPS

Quality

Figure 2. Router front view

Table 1. LED and button descriptions

LED	Description

Signal	•	5 bars. Excellent coverage.
Quality	•	4 bars. Strong coverage.
	• 3 bars. Moderate coverage.
	• 1 bar. Poor coverage.
	• Off. No coverage.

Power	• Solid white. The router is powered on and ready.
	• Blinking red (slow). The router firmware us updating.
	• Solid red. This LED lights red when the router is booting. If it stays red, this indicates a
		system failure or that the router has overheaded.
	• Off. No power is supplied to the router.

Internet	• Solid white. The Internet connection is ready.
	• Solid red. Network error.
	• Blinking red. The traffic meter limit has been reached and Internet traffic is blocked.
	• Off. No Internet connection is detected.

Ethernet
LAN	• Solid white. One or more local Ethernet ports have detected wired links.
	• Off. The router does not detect links on these ports.

USB	• Solid white. The router has accepted the USB device. The USB device is ready to be used.
	• Off. No USB device is connected or someone clicked the Safely Remove Hardware button,
		and it is now safe to remove the attached USB device.

WAN	• Solid white. An Ethernet WAN device is connected and is working.
	• Solid blue. Mobile WAN is in use.
	• Off. No Ethernet WAN Internet connectivity.

Hardware Setup

9

Image 9

NETGEAR (LG2200D) user manual Front Panel, Signal Power Internet LAN USB WAN WiFi WPS Quality

Contents

Cellular 4G LTE Router LG2200D Support TrademarksCompliance Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Unpack Your Router Check the package contents Front Panel Signal Power Internet LAN USB WAN WiFi WPS Quality Cellular 4G LTE Router LG2200D LED and button descriptions Rear Panel Attach the Antennas Find the Best Spot for Your Router To attach the antennas  To position your router  To seat a SIM card Seat a SIM Card Connect to the Network Access the Router WiFi Connection Wired Connection To find and select the WiFi network  To use WPS to connect to the WiFi network Use an Internet Browser to Access the Router Types of LoginsLabel  To log in to the router Specify Your Internet Settings Use the Internet Setup Wizard  To use the Setup WizardSelect Advanced Setup Wizard  To view or change the settings Specify Mobile Broadband Internet SettingsSelect Mobile Internet Roaming automatically SIM Card PIN Code Settings  To enable or disable the SIM card PIN codeSelect Advanced Advanced Setup SIM Settings  To change the SIM card PIN code Control Access to the Internet  To set up Live Parental Controls Parental ControlsSelect Parental Controls Control Access to the Internet  To set up keyword blocking Use Keywords to Block Internet SitesClick the Take me to the status screen button  To delete keywords from the list Select Advanced Security Block Sites Block Services from the Internet  To block servicesSelect Advanced Security Block Services Control Access to the Internet Schedule When to Block Internet Sites and Services  To schedule blockingSelect Advanced Security Schedule  To set up email notifications Set Up Security Event Email NotificationsAvoid Blocking on a Trusted Computer  To specify a trusted computer Control Access to the Internet Port Forwarding to Permit External Host Communications  To forward specific incoming protocols Set Up Port Forwarding to a Local Server Add a Custom Port Forwarding Service  To add a custom serviceClick the Add Custom Service button Delete a Port Forwarding Entry Edit a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry Application Example Make a Local Web Server Public How the Router Implements the Port Forwarding Rule To make a local web server public Set Up Port Triggering Add a Port Triggering Service To add a port triggering service  To enable port triggering Enable Port Triggering Application Example Port Triggering for Internet Relay Chat Clear the Disable Port Triggering check box Control Access to the Internet Specify Network Settings View WAN Settings  To view the WAN settingsSelect Advanced Setup WAN Setup Change the MTU Size  To change the MTU size Set Up a Default DMZ Server  To set up a default DMZ server Change the Router’s Device Name To change the router’s device name Select Advanced Setup LAN Setup Change the LAN TCP/IP Settings To change the LAN TCP/IP settings LAN IP address Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns Disable the Dhcp Server Feature in the Router  To disable the Dhcp server feature in the routerReserve LAN IP Addresses  To reserve an IP address  To edit a reserved address entry To delete a reserved address entry WMM QoS for Wireless Multimedia Applications Quality of Service Setup To disable WMM QoS Select Advanced Setup QoS Setup Set Up QoS for Internet Access Select the Turn Internet Access QoS On check box To create a QoS policy for applications and online games Specify Network Settings Click the Add Priority Rule button QoS for a Router LAN Port Click Add Priority Rule QoS for a MAC Address Select Advanced QoS Setup  To edit a QoS policy To delete a QoS policy Specify Basic WiFi Settings Use the WPS Wizard for WiFi Connections To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option Control the Wireless Radios Use the WiFi On/Off ButtonEnable or Disable the Wireless Radios  To enable or disable the wireless radios Set Up a Wireless ScheduleSelect Advanced Advanced Setup WiFi Settings  To set up the wireless schedule  To specify WPS Settings Specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario  To set up the base station Set Up the Base Station  To configure a Netgear router as a repeater Set Up a Repeater Specify Network Settings USB Storage Access a USB Storage Device  To connect a USB storage device To map the USB device to a Windows network drive  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computer Share Photos File-Sharing ScenariosStore Files in a Central Location for Printing  To share files with your friends and family View a USB Device Attached to the Router Share Large Files over the Internet To view basic information about the USB storage device USB Storage Device Network and Access Settings  To view or change the USB storage advanced settingsSelect Basic ReadySHARE Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced Settings  To view network folders Available Network Folders Select Advanced ReadySHARE  To add a network folderClick the Create Network Folder button  To edit a network folder Specify Approved USB Devices  To set up approved USB devices Safely Remove a USB Drive Select USB Storage Basic SettingsSelect the Allow only approved devices check box  To remove a USB disk drive safely ReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer Netgear USB Control Center utility USB Control Center Utility USB Printer Control Center Configuration Printers and Faxes screen Scan with a Multifunction Printer Administration Update the Router Firmware  To check for new firmware and update your routerSelect Advanced Administration Router Update LTE Modem Upgrade  To upgrade the LTE modem softwareSelect Advanced Administration LTE Modem Upgrade Change the admin Password  To set the admin passwordSelect Advanced Administration Set Password Recover the admin Password  To set up password recovery To recover your password  To reboot the router Reboot the RouterView Router Status  To view router status and usage information Modem Identity Select Advanced Administration Router Status View Mobile Broadband Status IP Subnet Mask Wireless PortConnection Status Gateway IP Address LAN Port Select Advanced  To view statistics for the Internet connection Show Statistics View Devices Currently on the Network  To view the Attached Devices screenSelect Attached Devices Select Advanced Administration Logs View Logs of Router Activity To view logs Back Up the Configuration Settings Manage the Configuration File To back up the router’s configuration settings Select Advanced Administration Backup Settings Erase the Current Configuration Settings Restore Configuration Settings To restore configuration settings that you backed up Do not interrupt the reboot process  To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes  To edit a static route  To set up remote management Remote Management To delete a static route Administration 104 Universal Plug and Play  To specify Universal Plug and Play settings  To monitor Internet traffic Monitor Internet Traffic Click Advanced Advanced Setup Traffic Meter Diagnostics  To run the diagnosticsSelect Advanced Administration Diagnostics Administration 109 Troubleshooting Power LED Stays Amber Power LED Is Off or BlinkingTroubleshoot with the LEDs LEDs Never Turn Off WiFi LED Is Off Cannot Log In to the RouterInternet LED Is Off Forgotten WiFi Password Problems with Date and Time Troubleshoot Your Network Using the Ping Utility WiFi ConnectivityTest the LAN Path to Your Router  To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection Cable a WAN Ethernet Internet Connection  To install the router with an Ethernet Internet connection Advanced Internet Setup Specify the Internet Connection ModeSelect Advanced Setup Broadband Settings  To change the Internet setup Select Advanced Setup Internet Setup Internet IP Address Internet Service Provider. PPPoE or PPPoA Select Advanced Advanced Setup IPv6  To set up an IPv6 Internet connection typeIPv6 Requirements for Entering IPv6 Addresses Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125  To set up a fixed IPv6 Internet connection  To set up a pass-through IPv6 Internet connectionIPv6 Pass Through IPv6 Fixed Set Up an Ethernet WAN Internet Connection 127 IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection Connect to the Internet Troubleshoot an Ethernet WAN Internet Connection Troubleshoot Internet Browsing Supplemental Information Factory default settings Factory Settings Supplemental Information 134 LG2200D Router specifications Technical Specifications