Show Statistics | NETGEAR (LG2200D) instruction

U.S. Cellular® 4G LTE™ Router (LG2200D)

Show Statistics

To view statistics for the Internet connection:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED

5.In the Internet Connection pane, click the Show Statistics button.

The following information displays:

•System Up Time. The time elapsed since the router was last restarted.

•Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays:

-Status. The link status of the port.

-TxPkts. The number of packets transmitted on this port since reset or manual clear.

-RxPkts. The number of packets received on this port since reset or manual clear.

-Collisions. The number of collisions on this port since reset or manual clear.

-Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN ports.

Administration

96

Image 96

NETGEAR (LG2200D) user manual Show Statistics,  To view statistics for the Internet connection

Contents

Cellular 4G LTE Router LG2200D Support TrademarksCompliance Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Check the package contents Unpack Your Router Signal Power Internet LAN USB WAN WiFi WPS Quality Front Panel Rear Panel Cellular 4G LTE Router LG2200D LED and button descriptions Attach the Antennas Find the Best Spot for Your Router To attach the antennas  To position your router Seat a SIM Card  To seat a SIM card Connect to the Network Access the Router Wired Connection WiFi Connection To find and select the WiFi network  To use WPS to connect to the WiFi network Types of Logins Use an Internet Browser to Access the RouterLabel  To log in to the router Specify Your Internet Settings Use the Internet Setup Wizard  To use the Setup WizardSelect Advanced Setup Wizard Specify Mobile Broadband Internet Settings  To view or change the settingsSelect Mobile Internet Roaming automatically SIM Card PIN Code Settings  To enable or disable the SIM card PIN codeSelect Advanced Advanced Setup SIM Settings  To change the SIM card PIN code Control Access to the Internet  To set up Live Parental Controls Parental ControlsSelect Parental Controls Control Access to the Internet  To set up keyword blocking Use Keywords to Block Internet SitesClick the Take me to the status screen button Select Advanced Security Block Sites  To delete keywords from the list Block Services from the Internet  To block servicesSelect Advanced Security Block Services Control Access to the Internet Schedule When to Block Internet Sites and Services  To schedule blockingSelect Advanced Security Schedule Set Up Security Event Email Notifications  To set up email notificationsAvoid Blocking on a Trusted Computer  To specify a trusted computer Control Access to the Internet Port Forwarding to Permit External Host Communications Set Up Port Forwarding to a Local Server  To forward specific incoming protocols Add a Custom Port Forwarding Service  To add a custom serviceClick the Add Custom Service button Edit a Port Forwarding Entry Delete a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry Application Example Make a Local Web Server Public How the Router Implements the Port Forwarding Rule To make a local web server public Set Up Port Triggering Add a Port Triggering Service To add a port triggering service Enable Port Triggering  To enable port triggering Clear the Disable Port Triggering check box Application Example Port Triggering for Internet Relay Chat Control Access to the Internet Specify Network Settings View WAN Settings  To view the WAN settingsSelect Advanced Setup WAN Setup Change the MTU Size Set Up a Default DMZ Server  To change the MTU size  To set up a default DMZ server Change the Router’s Device Name To change the router’s device name Change the LAN TCP/IP Settings Select Advanced Setup LAN Setup To change the LAN TCP/IP settings LAN IP address Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns Disable the Dhcp Server Feature in the Router  To disable the Dhcp server feature in the routerReserve LAN IP Addresses  To reserve an IP address  To edit a reserved address entry To delete a reserved address entry Quality of Service Setup WMM QoS for Wireless Multimedia Applications To disable WMM QoS Select Advanced Setup QoS Setup Set Up QoS for Internet Access Select the Turn Internet Access QoS On check box To create a QoS policy for applications and online games Specify Network Settings QoS for a Router LAN Port Click the Add Priority Rule button QoS for a MAC Address Click Add Priority Rule Select Advanced QoS Setup  To edit a QoS policy To delete a QoS policy Use the WPS Wizard for WiFi Connections Specify Basic WiFi Settings To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings Change the WiFi Security Option  To change the WPA settings Control the Wireless Radios Use the WiFi On/Off ButtonEnable or Disable the Wireless Radios Set Up a Wireless Schedule  To enable or disable the wireless radiosSelect Advanced Advanced Setup WiFi Settings  To set up the wireless schedule Specify WPS Settings  To specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario Set Up the Base Station  To set up the base station Set Up a Repeater  To configure a Netgear router as a repeater Specify Network Settings USB Storage Access a USB Storage Device  To connect a USB storage device To map the USB device to a Windows network drive  To access the USB drive from a remote computer  To access the USB drive with FTP from a remote computer File-Sharing Scenarios Share PhotosStore Files in a Central Location for Printing  To share files with your friends and family View a USB Device Attached to the Router Share Large Files over the Internet To view basic information about the USB storage device USB Storage Device Network and Access Settings  To view or change the USB storage advanced settingsSelect Basic ReadySHARE Select Advanced USB Storage Advanced Settings Network Neighborhood/MacShare. Enabled by default Available Network Folders  To view network folders  To add a network folder Select Advanced ReadySHAREClick the Create Network Folder button  To edit a network folder  To set up approved USB devices Specify Approved USB Devices Select USB Storage Basic Settings Safely Remove a USB DriveSelect the Allow only approved devices check box  To remove a USB disk drive safely ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer USB Control Center Utility Netgear USB Control Center utility Control Center Configuration USB Printer Scan with a Multifunction Printer Printers and Faxes screen Administration Update the Router Firmware  To check for new firmware and update your routerSelect Advanced Administration Router Update LTE Modem Upgrade  To upgrade the LTE modem softwareSelect Advanced Administration LTE Modem Upgrade Change the admin Password  To set the admin passwordSelect Advanced Administration Set Password Recover the admin Password  To set up password recovery To recover your password Reboot the Router  To reboot the routerView Router Status  To view router status and usage information Select Advanced Administration Router Status Modem Identity IP Subnet Mask Wireless Port View Mobile Broadband StatusConnection Status Gateway IP Address LAN Port Select Advanced Show Statistics  To view statistics for the Internet connection View Devices Currently on the Network  To view the Attached Devices screenSelect Attached Devices Select Advanced Administration Logs View Logs of Router Activity To view logs Manage the Configuration File Back Up the Configuration Settings To back up the router’s configuration settings Select Advanced Administration Backup Settings Restore Configuration Settings Erase the Current Configuration Settings To restore configuration settings that you backed up Do not interrupt the reboot process  To set up a static route Select Advanced Advanced Setup Static RoutesStatic Routes  To edit a static route  To set up remote management Remote Management To delete a static route Administration 104  To specify Universal Plug and Play settings Universal Plug and Play Monitor Internet Traffic  To monitor Internet traffic Click Advanced Advanced Setup Traffic Meter Diagnostics  To run the diagnosticsSelect Advanced Administration Diagnostics Administration 109 Troubleshooting Power LED Is Off or Blinking Power LED Stays AmberTroubleshoot with the LEDs LEDs Never Turn Off WiFi LED Is Off Cannot Log In to the RouterInternet LED Is Off Problems with Date and Time Forgotten WiFi Password WiFi Connectivity Troubleshoot Your Network Using the Ping UtilityTest the LAN Path to Your Router  To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection  To install the router with an Ethernet Internet connection Cable a WAN Ethernet Internet Connection Specify the Internet Connection Mode Advanced Internet SetupSelect Advanced Setup Broadband Settings  To change the Internet setup Select Advanced Setup Internet Setup Internet Service Provider. PPPoE or PPPoA Internet IP Address  To set up an IPv6 Internet connection type Select Advanced Advanced Setup IPv6IPv6 Requirements for Entering IPv6 Addresses Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125  To set up a pass-through IPv6 Internet connection  To set up a fixed IPv6 Internet connectionIPv6 Pass Through IPv6 Fixed Set Up an Ethernet WAN Internet Connection 127  To set up an IPv6 Internet connection with a Dhcp server IPv6 Dhcp  To set up a PPPoE IPv6 Internet connection IPv6 PPPoE Troubleshoot an Ethernet WAN Internet Connection Connect to the Internet Troubleshoot Internet Browsing Supplemental Information Factory Settings Factory default settings Supplemental Information 134 Technical Specifications LG2200D Router specifications