Control Access to the Internet
34
U.S. Cellular® 4G LTE™ Router (LG2200D)
Add a Custom Port Forwarding Service
To add a custom service:
1. Find out which port number or range of numbers the application uses.
You can usually find this information by contacting the publisher of the application or user
groups or news groups.
2. Log in to the router.
3. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
4. Leave the Port Forwarding radio button selected as the service type.
5. Click the Add Custom Service button.
6. In the Service Name field, enter a descriptive name.
7. In the Service Type field, select the protocol. If you are unsure, select TCP/UDP.
8. In the External Starting Port field, enter the beginning port number.
If the application uses a single port, enter the same port number in the Ending Port field.
If the application uses a range of ports, enter the ending port number of the range in the
External Ending Port field.
9. Specify the internal ports by one of these methods:
•Leave the Use the same port range for Internal port check box selected.
•Type the port numbers in the Internal Starting Port and Internal Ending Port fields.
10. Type the IP address in the Internal IP address field or select the radio button for an
attached device listed in the table.
11. Click the Apply button.
The service is now in the list.