U.S. Cellular® 4G LTE™ Router (LG2200D)

5.Your router performs Network Address Translation (NAT) on the source IP address, and sends the reply through the Internet to the computer or wireless device that sent the web page request.

Set Up Port Triggering

Port triggering is a dynamic extension of port forwarding that is useful in these cases:

An application must use port forwarding to more than one local computer (but not simultaneously).

An application must open incoming ports that are different from the outgoing port.

With port triggering, the router monitors traffic to the Internet from an outbound “trigger” port that you specify. For outbound traffic from that port, the router saves the IP address of the computer that sent the traffic. The router temporarily opens the incoming port or ports that you specify in your rule, and forwards that incoming traffic to that destination.

Port forwarding creates a static mapping of a port number or range of ports to a single local computer. Port triggering can dynamically open ports to any computer when needed and close the ports when they are no longer needed.

Note: If you use applications such as multiplayer gaming, peer-to-peer connections, real-time communications such as instant messaging, or remote assistance (a feature in Windows XP), enable Universal Plug and Play (UPnP). For more information, see Universal Plug and Play on page 105.

Add a Port Triggering Service

To add a port triggering service:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.

5.Select the Port Triggering radio button.

Control Access to the Internet

37

Page 37
Image 37
NETGEAR (LG2200D) user manual Set Up Port Triggering, Add a Port Triggering Service,  To add a port triggering service