Set Up the Base Station | NETGEAR (LG2200D) manual

U.S. Cellular® 4G LTE™ Router (LG2200D)

Set Up the Base Station

The wireless repeating function works only in hub and spoke mode. The units cannot be daisy-chained. You must know the wireless settings for both units. You must know the MAC address of the remote unit. First, set up the base station, then set up the repeater.

To set up the base station:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED > Advanced Setup > Wireless Repeating Function.

5.Select the Enable Wireless Repeating Function check box.

6.Select the Wireless Base Station radio button.

7.To prevent wireless clients from associating with the base station and allow LAN client associations only, select the Disable Wireless Client Association check box.

You can leave the check box cleared if you prefer wireless clients to be able to associate with the base stations.

8.In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access points that should function as repeaters.

If your router is the base station, it can function as the “parent” for up to four other access points.

9.Click the Apply button. Your changes are saved.

Specify Network Settings

65

Image 65

NETGEAR (LG2200D) user manual Set Up the Base Station,  To set up the base station

Contents

Cellular 4G LTE Router LG2200D Compliance SupportTrademarks Contents Specify Network Settings Appendix a Supplemental Information Technical Specifications Hardware Setup Unpack Your Router Check the package contents Front Panel Signal Power Internet LAN USB WAN WiFi WPS Quality Cellular 4G LTE Router LG2200D LED and button descriptions Rear Panel  To attach the antennas Attach the AntennasFind the Best Spot for Your Router  To position your router  To seat a SIM card Seat a SIM Card Connect to the Network Access the Router WiFi Connection Wired Connection To find and select the WiFi network  To use WPS to connect to the WiFi network Use an Internet Browser to Access the Router Types of LoginsLabel  To log in to the router Specify Your Internet Settings Select Advanced Setup Wizard Use the Internet Setup Wizard To use the Setup Wizard  To view or change the settings Specify Mobile Broadband Internet SettingsSelect Mobile Internet Roaming automatically Select Advanced Advanced Setup SIM Settings SIM Card PIN Code Settings To enable or disable the SIM card PIN code  To change the SIM card PIN code Control Access to the Internet Select Parental Controls  To set up Live Parental ControlsParental Controls Control Access to the Internet Click the Take me to the status screen button  To set up keyword blockingUse Keywords to Block Internet Sites  To delete keywords from the list Select Advanced Security Block Sites Select Advanced Security Block Services Block Services from the Internet To block services Control Access to the Internet Select Advanced Security Schedule Schedule When to Block Internet Sites and Services To schedule blocking  To set up email notifications Set Up Security Event Email NotificationsAvoid Blocking on a Trusted Computer  To specify a trusted computer Control Access to the Internet Port Forwarding to Permit External Host Communications  To forward specific incoming protocols Set Up Port Forwarding to a Local Server Click the Add Custom Service button Add a Custom Port Forwarding Service To add a custom service Delete a Port Forwarding Entry Edit a Port Forwarding Entry To edit a port forwarding entry  To delete a port forwarding entry  To make a local web server public Application Example Make a Local Web Server PublicHow the Router Implements the Port Forwarding Rule  To add a port triggering service Set Up Port TriggeringAdd a Port Triggering Service  To enable port triggering Enable Port Triggering Application Example Port Triggering for Internet Relay Chat Clear the Disable Port Triggering check box Control Access to the Internet Specify Network Settings Select Advanced Setup WAN Setup View WAN Settings To view the WAN settings Change the MTU Size  To change the MTU size Set Up a Default DMZ Server  To change the router’s device name  To set up a default DMZ serverChange the Router’s Device Name Select Advanced Setup LAN Setup Change the LAN TCP/IP Settings To change the LAN TCP/IP settings LAN IP address Select Advanced Setup LAN Setup Specify the IP Addresses that the Router Assigns Reserve LAN IP Addresses Disable the Dhcp Server Feature in the Router To disable the Dhcp server feature in the router  To delete a reserved address entry  To reserve an IP address To edit a reserved address entry WMM QoS for Wireless Multimedia Applications Quality of Service Setup To disable WMM QoS Select Advanced Setup QoS Setup  To create a QoS policy for applications and online games Set Up QoS for Internet AccessSelect the Turn Internet Access QoS On check box Specify Network Settings Click the Add Priority Rule button QoS for a Router LAN Port Click Add Priority Rule QoS for a MAC Address  To delete a QoS policy Select Advanced QoS Setup To edit a QoS policy Specify Basic WiFi Settings Use the WPS Wizard for WiFi Connections To use the WPS Wizard Select Advanced WPS Wizard  To specify basic wireless settings  To change the WPA settings Change the WiFi Security Option Enable or Disable the Wireless Radios Control the Wireless RadiosUse the WiFi On/Off Button  To enable or disable the wireless radios Set Up a Wireless ScheduleSelect Advanced Advanced Setup WiFi Settings  To set up the wireless schedule  To specify WPS Settings Specify WPS Settings Set Up a Wireless Distribution System Following figure shows a wireless repeating scenario  To set up the base station Set Up the Base Station  To configure a Netgear router as a repeater Set Up a Repeater Specify Network Settings USB Storage  To map the USB device to a Windows network drive Access a USB Storage Device To connect a USB storage device  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computer Share Photos File-Sharing ScenariosStore Files in a Central Location for Printing  To share files with your friends and family  To view basic information about the USB storage device View a USB Device Attached to the RouterShare Large Files over the Internet Select Basic ReadySHARE USB Storage Device Network and Access Settings To view or change the USB storage advanced settings Network Neighborhood/MacShare. Enabled by default Select Advanced USB Storage Advanced Settings  To view network folders Available Network Folders Select Advanced ReadySHARE  To add a network folderClick the Create Network Folder button  To edit a network folder Specify Approved USB Devices  To set up approved USB devices Safely Remove a USB Drive Select USB Storage Basic SettingsSelect the Allow only approved devices check box  To remove a USB disk drive safely ReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer ReadySHARE Printer Netgear USB Control Center utility USB Control Center Utility USB Printer Control Center Configuration Printers and Faxes screen Scan with a Multifunction Printer Administration Select Advanced Administration Router Update Update the Router Firmware To check for new firmware and update your router Select Advanced Administration LTE Modem Upgrade LTE Modem Upgrade To upgrade the LTE modem software Select Advanced Administration Set Password Change the admin Password To set the admin password  To recover your password Recover the admin Password To set up password recovery  To reboot the router Reboot the RouterView Router Status  To view router status and usage information Modem Identity Select Advanced Administration Router Status View Mobile Broadband Status IP Subnet Mask Wireless PortConnection Status Gateway IP Address LAN Port Select Advanced  To view statistics for the Internet connection Show Statistics Select Attached Devices View Devices Currently on the Network To view the Attached Devices screen  To view logs Select Advanced Administration LogsView Logs of Router Activity Back Up the Configuration Settings Manage the Configuration File To back up the router’s configuration settings Select Advanced Administration Backup Settings Erase the Current Configuration Settings Restore Configuration Settings To restore configuration settings that you backed up Do not interrupt the reboot process Static Routes  To set up a static routeSelect Advanced Advanced Setup Static Routes  To edit a static route  To delete a static route  To set up remote managementRemote Management Administration 104 Universal Plug and Play  To specify Universal Plug and Play settings  To monitor Internet traffic Monitor Internet Traffic Click Advanced Advanced Setup Traffic Meter Select Advanced Administration Diagnostics Diagnostics To run the diagnostics Administration 109 Troubleshooting Power LED Stays Amber Power LED Is Off or BlinkingTroubleshoot with the LEDs LEDs Never Turn Off Internet LED Is Off WiFi LED Is OffCannot Log In to the Router Forgotten WiFi Password Problems with Date and Time Troubleshoot Your Network Using the Ping Utility WiFi ConnectivityTest the LAN Path to Your Router  To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Set Up an Ethernet WAN Internet Connection Cable a WAN Ethernet Internet Connection  To install the router with an Ethernet Internet connection Advanced Internet Setup Specify the Internet Connection ModeSelect Advanced Setup Broadband Settings  To change the Internet setup Select Advanced Setup Internet Setup Internet IP Address Internet Service Provider. PPPoE or PPPoA Select Advanced Advanced Setup IPv6  To set up an IPv6 Internet connection typeIPv6 Requirements for Entering IPv6 Addresses Auto Detect IPv6 Auto Config IPv6 6to4 Tunnel Set Up an Ethernet WAN Internet Connection 125  To set up a fixed IPv6 Internet connection  To set up a pass-through IPv6 Internet connectionIPv6 Pass Through IPv6 Fixed Set Up an Ethernet WAN Internet Connection 127 IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection Connect to the Internet Troubleshoot an Ethernet WAN Internet Connection Troubleshoot Internet Browsing Supplemental Information Factory default settings Factory Settings Supplemental Information 134 LG2200D Router specifications Technical Specifications