Date-Setup

4.Press the down arrow button (6) repeatedly until TIME- SETUP appears in the LCD display (2).

5.Press the right arrow button (6). TIME? 24HR 12:00 appears in the LCD display (2). The message 24HR blinks.

Note:

Press the up or down arrow button for (6) 12-hour display. All other settings are explained using 24-hour display as example.

6.Press the right arrow button (6). TIME? 24HR 12:00 appears in the LCD display(2). The hours value blinks.

7.Press the up or down arrow button (6) to set the hours.

8.Press the right arrow button (6). The minutes value blinks.

9.Press the up or down arrow button (6) to set the minutes.

10.Press the right arrow button (6). SUCCESS appears in the LCD display (2).

11.Press the EXIT button (8) repeatedly until the standard display appears in the LCD display (2).

Note:

If no button is pressed for approx. 30 seconds, the message TIMEOUT appears in the LCD display (2). Then the standard display is shown automatically.

Set the year, month, date and day of the week.

1.Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2).

2.Press the down arrow button (6). SYSTEM-SETUP appears in the LCD display (2).

3.Press the right arrow button (6). VOL/MUTE SETUP appears in the LCD display (2).

4.Press the down arrow button (6) repeatedly until DATE- SETUP appears in the LCD display (2).

5.Press the right arrow button (6). YEAR? 2006 appears in the LCD display (2). The numbers for the year blink.

6.Press the up or down arrow button (6) to set the year.

7.Press the right arrow button (6). MONTH? 1 appears in the LCD display (2). The month value blinks.

9.Press the right arrow button (6). DATE? 1 appears in the LCD display (2). The date value blinks.

10.Press the up or down arrow button (6) to set the day.

11.Press the right arrow button (6). DAY? SUN appears in the LCD display (2). The letters for the day of the week blink.

12.Press the up or down arrow button (6) to set the day of the week.

13.Press the right arrow button (6). SUCCESS appears in the LCD display (2).

14.Press the EXIT button (8) repeatedly until the standard display appears in the LCD display (2).