Note:
For a television, press the device button TV (4), then continue with step 8.
7.Press the up or down arrow button (6). The next device appears in the LCD display (2).
8.Confirm the selection with the OK button (7). SEARCH KEY? appears in the LCD display (2).
Note:
The remote control switches the device code every second and sends an infrared signal. To set the time to three seconds, press the CH button (17) twice during the next step.
9.Press the CH button (17) once. SEARCHING... appears in the LCD display (2). The remote control automatically searches for the device code for your device.
Note:
The remote control searches the device list in the forward direction. To change the search direction, press "Minus" on the CH button (17). To return to a forward search, press "Plus" on the CH button (17).
10.As soon as your device reacts, press the OK button (7). The device code is saved. SUCCESS appears in the LCD display (2).
11.Press various buttons on the remote control to check the setting. If your device only partially responds, repeat the steps with the next device code.
Manual search
Manually search for the device code within the internal list of the remote control.
Note:
To conclude your input, press the EXIT button (8).
1.Switch on the device for which you would like to program the remote control.
2.Hold the S button (5) pressed until
3.Press the right arrow button (6). LIST CODES appears in the LCD display (2).
4.Press the down arrow button (6) repeatedly until SEARCH CODES appears in the LCD display (2).
5.Press the right arrow button (6). MODE KEY? appears on the LCD display (2).
6.Press the desired device button (4). DEVICE? TV appears in the LCD display (2).
18