Note:
If no button is pressed for approx. 30 seconds, the message TIMEOUT appears in the LCD display (2). Then the standard display is shown automatically.
BACKLIGHT SETUP
Set the backlight time for the LCD display (2).
The backlight time can be changed in five second steps.
1.Hold the S button (5) pressed until
2.Press the down arrow button (6).
3.Press the right arrow button (6). VOL/MUTE SETUP appears in the LCD display (2).
4.Press the down arrow button (6) repeatedly until BACK- LIGHT SETUP appears in the LCD display (2).
5.Press the right arrow button (6). BACKLIGHT TIME 10 appears in the LCD display (2). The seconds value blinks.
6.Press the up or down arrow button (6) to set the seconds.
7.Press the right arrow button (6). SUCCESS appears in the LCD display (2).
8.Press the EXIT button (8) repeatedly until the standard display appears in the LCD display (2).
Note:
If no button is pressed for approx. 30 seconds, the message TIMEOUT appears in the LCD display (2). Then the standard display is shown automatically.
SYSTEM-RESET
The remote control can be reset to the factory defaults.
Note:
All device codes, the system settings, all learned functions and macros are deleted!
1.Hold the S button (5) pressed until
14
