ENTER CODES

With the ENTER CODES function, you locate the device code in the enclosed manual “Manufacturer List with Device Code List“.

Note:

To conclude your input, press the EXIT button (8).

1.Switch on the device for which you would like to program the remote control.

2.Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2).

3.Press the right arrow button (6). LIST CODES appears in the LCD display (2).

4.Press the down arrow button (6). ENTER CODES appears in the LCD display (2).

5.Press the right arrow button (6). MODE KEY appears in the LCD display (2).

6.Press the desired device button (4). The LCD display (2) shows CODE 0001, for example. Find the device code in the manual "Manufacturer List with Device Code List".

7.Enter the device code with the number buttons (13). SUCCESS appears in the LCD display (2). If the entered

device code is incorrect, the message CODE ERROR appears in the LCD display (2). Repeat steps 2 to 8.

Repeat steps 1 to 8 for all devices that you would like to operate.

SEARCH CODES

Automatic search

Automatically search for the device code within the internal list of the remote control.

Note:

To conclude your input, press the EXIT button (8).

1.Switch on the device for which you would like to program the remote control.

2.Hold the S button (5) pressed until CODE-SETUP appears in the LCD display (2).

3.Press the right arrow button (6). LIST CODES appears in the LCD display (2).

4.Press the down arrow button (6) repeatedly until SEARCH CODES appears in the LCD display (2).

5.Press the right arrow button (6). MODE KEY? appears in the LCD display (2).

6.Press the desired device button (4). DEVICE? TV appears in the LCD display (2).

17

Page 19
Image 19
Silvercrest KH2150 operating instructions Enter Codes, Search Codes, Automatic search