U.S. Cellular® 4G LTE™ Router (LG2200D)

If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click the Apply button. To avoid this problem, use a computer with a wired connection to access the router.

To specify basic wireless settings:

1.Launch an Internet browser from a computer or wireless device that is connected to the network.

2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.

3.Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select Wireless.

5.In the Region list, select your region. In some locations, you cannot change this setting.

6.To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.

When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or wireless device.

7.To allow computers or wireless devices that join the network to use the Internet but not to access each other or access Ethernet devices on the network, select the Enable Wireless Isolation check box.

8.To change the network name (SSID), type a new name in the Name (SSID) field.

The name can be up to 32 characters long and it is case-sensitive. The default SSID is randomly generated and is on the router’s label. If you change the name, make sure to write down the new name and keep it in a safe place.

9.To change the wireless channel, select a number in the Channel list.

Specify Network Settings

58

Page 58
Image 58
NETGEAR (LG2200D) user manual  To specify basic wireless settings