U.S. Cellular® 4G LTE™ Router (LG2200D)
6.Click the Add Service button.
7.In the Service Name field, type a descriptive service name.
8.In the Service User list, select Any, or select Single address and enter the IP address of one computer.
•Any (the default) allows any computer on the Internet to use this service.
•Single address restricts the service to a particular computer.
9.Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select TCP/UDP.
10.In the Triggering Port field, enter the number of the outbound traffic port that will trigger the inbound ports to open.
11.Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields.
12.Click the Apply button.
The service is now in the Portmap table. You must enable port triggering before the router used port triggering for the service that you added. For more information, see Enable Port Triggering.
Enable Port Triggering
To enable port triggering:
1.Launch an Internet browser from a computer or wireless device that is connected to the network.
2.Enter http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays.
3.Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
The BASIC Home screen displays.
4.Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
Control Access to the Internet
38
