Asus P5GC-MX manual Chipset, Enhanced C1 Control Auto, CPU Internal Thermal Control Auto

Enhanced C1 Control [Auto]

When set to [Auto], the BIOS will automatically check the CPU’s capability to enable the C1E support. In C1E mode, the CPU power consumption is lower when idle. Configuration options: [Auto] [Disabled]

CPU Internal Thermal Control [Auto]

Disables or sets the CPU internal thermal control.

Configuration options: [Auto] [Disabled]

HyperThreading Technology [Enabled]

Allows you to enable or disable the processor Hyper-Threading Technology. Configuration options: [Disabled] [Enabled]

The following item appears only when you installed an Intel® Pentium® 4 and later processors that supports the Enhanced Intel SpeedStep® Technology (EIST).

Intel(R) SpeedStep Technology [Disabled]

Allows you to use the Enhanced Intel SpeedStep® Technology. When set to [Automatic], you can adjust the system power settings in the operating system to use the EIST feature.

Set this item to [Maximum] or [Disabled] if you do not want to use the EIST. The CPU constantly operates at a lower internal frequency when you set this item to [Minimum].

Configuration options: [Enabled] [Disabled]

2.4.3 Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then press <Enter> to display the sub-menu.

Advanced Chipset Settings
DRAM Frequency	[Auto]
Configure DRAM Timing by SPD	[Enabled]
Hyper Path 3	[Auto]
DRAM Throttling Threshold	[Auto]
Boot Graphic Adapter Priority	[PCI Express/Int-VG]
Internal Graphics Mode Select	[Enabled, 8MB]
Graphics memory type	[Auto]		Select Screen
Boot Display Device	[Auto]
TV Connector	[Auto]		Select Item
HDTV Output	[Auto]	+-	Change Option
TV Standard	[VBIOS-Default]	F1	General Help
		F10	Save and Exit
PEG Buffer Length	[Auto]	ESC	Exit
Link Latency	[Auto]	+-	Change Option
		F1	General Help
PEG Root Control	[Auto]	F10	Save and Exit
Slot Power	[Auto]
		ESC	Exit
High Priority Port Select	[Disabled]

ASUS P5GC-MX 2-21