
8.2Adjusting the Gradation Levels (“Gradation Adjust”
Function) | |
To adjust the gradation levels |
8.3Turning off the Sleep function (“Disable Sleep Mode”
| Function) | |
| To turn off the Sleep function | |
8.4 | Erasing Copy Edges (“Erase” Function) | |
| To set the “Erase” function |
8.5Specifying the Expert Settings (“Expert User’s Mode”
Function) | |
To change the Expert User’s Mode settings | |
To set the “Thick Paper and OHP Film Image Density” |
|
parameter | |
To set the “Color Shift Correction” parameters | |
To set the “Stabilizer” parameter | |
To set the “PRT Area (Top Margin)” parameter | |
To set the “PRT Area (Left Margin)” parameter | |
To set the “PRT Area (Dup. Left Margin)” parameter | |
To set the “Thin Orig.” parameter |
8.6Registering Scan Save Locations (“Scanner Addr. Input”
|
| Function) | |
9 | Touch Panel Messages |
| |
| 9.1 | When the Message “Replenish paper.” Appears | |
|
| To load paper into the 1st drawer |
|
|
| paper drawer) | |
|
| To load paper into the | |
|
| To load paper into the | |
| 9.2 | When the Message “Please add Toner.” Appears | |
|
| To add toner | |
| 9.3 | When the Message “Replace Staple Cartridge X.” Appears... | |
|
| To replace the staple cartridge | |
| 9.4 | When the Message “Misfeed detected.” Appears | |
|
| Paper Misfeed in the Manual Bypass Tray | |
|
| To clear a paper misfeed in the manual bypass tray | |
|
| Paper Misfeed in the Duplex Unit | |
|
| To clear a paper misfeed in the duplex unit | |
|
| Paper Misfeed in the Paper Feed Unit | |
|
| To clear a paper misfeed in the paper feed unit | |
|
| Paper Misfeed in the Copier | |
|
| To clear a paper misfeed in the copier | |
|
| Paper Misfeed in the Duplexing Document Feeder | |
|
| To clear a paper misfeed in the duplexing document feeder |
vii