
7
Utility Mode Operations
To set the “Energy Save Mode” parameter
This parameter can be used to specify the length of time (between 1 and 240 minutes) after the last operation until the copier automatically enters Energy Saver mode. The default setting is “15 min.”
1In the User’s Choice screen, touch [Energy Save Mode].
2Using the keypad, enter the desired number of minutes, and then touch [Enter].
?Do you wish to change the number of minutes entered?
ÜPress the [C] (clear) key to erase the entered number, and then use the keypad to enter the correct number of minutes.
3In the User’s Choice screen, touch [Exit].
|