Basic Operations
5
To make copies onto postcards
1Position the document(s) to be copied. (Refer to page
2Select the desired color mode. (Refer to page
3Open the manual bypass tray.
4Adjust the paper guides to the size of the paper, and then load the
paper so that the front side of the paper faces down. Lightly slide the paper into the feed slot as much as possible so that it is ready to be fed into the copier.
m Load postcards widthwise into the manual bypass tray with the surface to be copied onto facing down.
5Make sure that the screen allowing you to select the manual bypass tray paper size is displayed, and then touch [4 × 6].
The “Paper Type” setting automatically changes to “Thick Paper 2”.
(* Setting the paper size for the manual bypass tray to “4 × 6” automatically changes the “Paper Type” setting to “Thick Paper 2”.)
|
