Kyocera KM-C1530 manual To set the PRT Area Left Margin parameter

Administrator Mode Operations

8

To set the “PRT Area (Left Margin)” parameter

This parameter can be used to adjust the printing position in the secondary scanning direction when making single-sided copies.

This parameter can be set between –3.0 mm and +3.0 mm, in increments of 0.2 mm.

The left margin of the print area for the first and second paper drawers is adjusted during manufacturing of the copier. Normally, the left margin will not need to be adjusted.

As an example, the following procedure describes how to adjust the left margin for the third paper drawer.

1Load paper (11 × 17L) into the third paper drawer.

2In the Expert User’s Mode screen, touch [2/2], and then touch [PRT Area (Left Margin)].

The Left Margin screen appears.

3Touch [3rd Drawer], and then press the [Start] key to print out the test pattern.

KM-C1530 8-29