8
Administrator Mode Operations
4Touch [Gradation Adjust].
The Gradation Adjust screen appears.
5Load paper (11 × 17L) into any paper drawer, and then press the [Start] key to print out the gradation adjustment test pattern.
?Are more than one of the indicated paper sizes already loaded into paper drawers?
ÜThe paper size for printing the test pattern will be chosen
according to the following order: A3L, 11 × 17L, A4C, LetterC
6Place the printed test pattern on top
of the original glass, and then place five more sheets of blank paper on top of the printed test pattern page.
? Is the correct type of paper for printing the test pattern loaded?
ÜBe sure that standard paper (17 to 24 lbs.) is loaded.
?Was the test pattern not printed?
ÜIt takes some time for the test pattern to be printed. Please wait a little while.
7Close the original cover, and then press the [Start] key to begin adjusting the gradation. When the color gradation has been adjusted, the Administrator Mode screen appears.
8Repeat steps 5 through 8 three times.
9In the Administrator Mode screen, touch [Exit].
10In the Utility screen, touch [Exit].
|
