Whirlpool WFG710H0AH Troubleshooting, Oven Light, To Replace, Problem Possible Causes Solutions

Models: WFG710H0AH

1 44
Download 44 pages 2.25 Kb
Page 16
Image 16

The oven light is a standard 40-watt appliance bulb. Before replacing, make sure the oven and cooktop are cool and the control knobs are in the off position.

To Replace:

1.Unplug range or disconnect power.

Oven Light

2.Turn the glass bulb cover in the back of the oven counterclockwise to remove.

3.Turn bulb counterclockwise to remove from socket.

4.Replace bulb, then bulb cover by turning clockwise.

5.Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.whirlpool.com

In Canada, reference the Customer Service section at www.whirlpool.ca.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

PROBLEM

POSSIBLE CAUSES

SOLUTIONS

Nothing will operate

Power supply cord is unplugged.

Plug into a grounded 3 prong outlet.

 

 

 

 

Household fuse is blown or a

Replace the fuse or reset the circuit breaker. If the problem

 

circuit breaker is tripped.

continues, call an electrician.

 

 

 

 

Main or regulator gas shutoff

See the Installation Instructions.

 

valve is in the off position.

 

 

 

 

 

The range is improperly

Contact a trained repair specialist or see Installation

 

connected to the gas supply.

Instructions.

Surface burners will not

The control knob is not set

operate

correctly.

Push in knob before turning to a setting.

 

Air in the gas lines

If this is the first time the surface burners have been used, turn

 

 

on any one of the surface burner knobs to release air from the

 

 

gas lines.

 

 

 

 

Clogged burner ports

See “Sealed Surface Burners” section.

 

 

 

Surface burner flames are

Clogged burner ports

See “Sealed Surface Burners” section.

uneven, yellow and/or noisy

 

 

 

 

 

 

Burner caps positioned

See “Sealed Surface Burners” section.

 

improperly

 

 

 

 

 

Range converted improperly

If propane gas is being used, contact a service technician or

 

 

see cover for contact information.

Excessive heat around

Cookware that is not the proper

cookware on cooktop

size

The cookware should be centered above the burner with the bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of the pan.

16

Page 16
Image 16
Whirlpool WFG710H0AH warranty Troubleshooting, Oven Light, To Replace, Problem Possible Causes Solutions