RANGE CARE

Clean Cycle

AquaLift™ Technology is an innovative cleaning solution that utilizes heat and water to release baked-on spills from the oven in less than 1 hour. This new cleaning technology is a low-heat, odor- free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean cycle. If your oven cavity is above 200°F (93°C), “OVEN COOLING” will appear in the display, and the Clean cycle will not be activated until the oven cavity cools down.

To Clean:

1.Remove all racks and accessories from the oven cavity and wipe excess soil. Use a plastic scraper to remove easily- removed soils.

2.Pour 1¾ cups (14 oz [414 mL]) of distilled or filtered water onto the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the water. Do not open the oven door during the Clean cycle. The water on the oven bottom is hot.

3.Press CLEAN and then START on the oven control panel.

4.Allow 40 minutes for cleaning and cool down. A beep will sound when the Clean cycle is complete.

5.Press CANCEL at the end of the cycle. CANCEL may be pressed at any time to stop the Clean cycle.

6.Remove the residual water and loosened soils with a sponge or cloth immediately after the Clean cycle is complete. Much of the initial 1¾ cups (14 oz [414 mL]) of water will remain in the oven after the cycle is completed. If additional soils remain, leave a small amount of water in the oven bottom to assist with the cleaning.

7.If any soils remain, remove them with a non-scratch scrubbing sponge or plastic scraper. Additional Clean cycles may be run to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals, including commercial oven cleaners or metal scouring pads, may cause permanent damage to the porcelain surface of the oven interior.

NOTES:

The range should be level to ensure that the entire surface of the bottom of the oven cavity is covered by water at the beginning of the Clean cycle.

For best results, use distilled or filtered water. Tap water may leave mineral deposits on the oven bottom.

Before removing the residual water and loosened soils at the end of the Clean cycle, insert a cloth or paper towel between the lower edge of the oven door and the front frame to keep water from spilling onto the front of the range and the floor.

Soil baked on through several cooking cycles will be more difficult to remove with the Clean cycle.

Nonabrasive scrub sponges or eraser style cleaning pads (without cleaners) can be effective for cleaning the oven cavity walls, oven door and oven bottom for difficult soils. For best results, moisten the pads and sponges before use.

Run an additional Clean cycle for stubborn soils.

affresh™ Kitchen Appliance Cleaner and affresh™ Cooktop Cleaner may be used to clean the oven bottom, walls and door when the oven has finished the cycle and returned to room temperature. Refer to the “Accessories” section for information on ordering.

Additional AquaLift™ Technology Cleaning Kits may be obtained by ordering Part Number W10423113RP. See the “Accessories” section for more information.

For assistance with AquaLift™ Technology, call

1-877-258-0808, or visit our website at http://whr.pl/aqualift.

14

Page 14
Image 14
Whirlpool WFG710H0AH warranty Range Care, Clean Cycle

WFG710H0AH specifications

The Whirlpool WFG710H0AH is a versatile and high-performance gas range designed to elevate your cooking experience in the kitchen. With its sleek stainless steel exterior and modern design, this range not only enhances the aesthetics of your space but also provides a variety of features that make meal preparation efficient and enjoyable.

One of the key highlights of the Whirlpool WFG710H0AH is its powerful burners. It comes equipped with five burners, including a high-output burner that provides a robust 15,000 BTUs of heat for quick boiling and frying. The other four burners offer varying heat outputs, allowing you to simmer sauces, cook delicate dishes, or sear meats with precision. The continuous cast-iron grates offer a sturdy cooking surface that allows pots and pans to slide easily from burner to burner, providing convenience during multitasking.

This range also features the innovative SpeedHeat burner, designed for fast heating. This allows you to achieve high temperatures in less time, making it perfect for searing and rapid boiling. The oven is equally impressive, with a total capacity of 5.0 cubic feet, allowing you to cook multiple dishes simultaneously. It includes a temperature management system that helps maintain consistent oven temperatures, ensuring even baking results.

The Whirlpool WFG710H0AH incorporates advanced technologies to simplify cooking and cleaning. The range is equipped with a convenient self-cleaning feature, which uses high temperatures to burn off food residues, saving you time and effort. Additionally, the digital oven controls provide precise temperature settings, enhancing your cooking precision.

Another notable feature is the AccuBake temperature management system that utilizes built-in sensors to monitor oven temperature, adjusting it as needed to ensure even baking. This guarantees that your favorite dishes come out just right every time.

Safety features have also been prioritized in the design of the WFG710H0AH. It features a durable oven door that helps keep heat in while reducing the risk of burns. Furthermore, the range includes a safety lock to prevent unintended use, making it an ideal choice for households with children.

In summary, the Whirlpool WFG710H0AH gas range is a well-rounded appliance that combines style with functionality. It’s equipped with powerful burners, a spacious oven, advanced temperature management technologies, and convenient cleaning options, making it an excellent addition to any modern kitchen. Whether you are a novice cook or a culinary expert, this range offers the features necessary to prepare a wide variety of meals with ease and confidence.