8
Administrator Mode Operations
8.4Erasing Copy Edges (“Erase” Function)
This function can be used to set the width of loss at the edge of the copy to either 5 mm (0.2 in.) or 7 mm (0.3 in.), as needed. The default setting is 5 mm (0.2 in.).
To set the “Erase” function
Note)
4Discuss any changes to this function with your service representative.
1Press the [Utility] key to enter Utility
mode.
2Touch [Administrator Mode].
3Using the keypad, enter the four- digit administrator access code.
|
