Kyocera KM-C1530 manual Function combination code keys, Code Explanation

11

Appendix

Function combination code keys

Code Explanation

2The functions can be combined.

●The functions cannot be combined. (The function set first takes precedence.)

×The functions cannot be combined. (The function set last takes precedence.)

AA warning appears if manual feeding was set by touching [Paper] in the Basic screen, then touching [Bypass]. If paper was inserted into the manual bypass tray, the function set first is cancelled.

BThese settings cannot be selected at the same time if overhead projector transparencies, thick paper or postcards are set as the paper type. The setting selected first takes precedence.

CThe “Mixed Orig Detection” function, “Auto Paper” Paper setting, and “Hole-Punch” setting cannot all be set at the same time. The first two settings selected take precedence.

DIf paper is loaded into the manual bypass tray, the “OHP Interleaving” function is cancelled. If there is no paper in the manual bypass tray, manual feeding of the paper through the manual bypass tray cannot be set.

EIf paper is loaded into the manual bypass tray, the “OHP Interleaving” function cannot be set. If there is no paper in the manual bypass tray, manual feeding of paper through the manual bypass tray is cancelled.

FThe “Sort” setting is automatically changed.

GWhen making “Single-sided Ö Double-sided” copies while manually placing the documents on the original glass, the copy job cannot be interrupted by pressing the [Interrupt] key.

*1: The “Staple” and “Hole-Punch” settings are only available if both the finisher and printer controller are installed.

11-12 KM-C1530