
| 9 | Touch Panel Messages | |
|
|
|
9.9 | Other Messages |
|
|
|
|
|
|
| Message | Cause | Remedy |
| Malfunction detected. | The copier malfunctioned | Inform your technical |
| Call your Technical Rep. and | and is unable to make | representative of the code |
| provide code: | copies. | displayed on the touch |
|
|
| panel. |
|
|
|
|
| Please input your | Access codes have been | Enter your access code. |
| Access# and press the | specified. Copies cannot be | p. |
| Access key. | made unless a specified |
|
|
| access code is entered. |
|
|
|
|
|
| Replenish paper. | The indicated drawer has ran | Load paper into the indicated |
|
| out of paper. | drawer. p. |
|
|
|
|
| Please add Toner. | Since the toner for the | Refill the toner. p. |
| Open the Toner Supply Door | indicated color has run out, |
|
| and follow the Operator’s | the copier is unable to make |
|
| Manual. | copies. |
|
|
|
|
|
| Please add XXXX Toner. | The toner for the indicated | Refill the toner. p. |
|
| color is about to run out. |
|
|
|
|
|
| Please install the correct | The indicated imaging unit is | Correctly install the imaging |
| Imaging | not installed correctly. | unit. Otherwise, contact your |
| Unit correctly, and close all |
| technical representative. |
| doors. |
|
|
|
|
|
|
| Please insert the Image | The image transfer belt unit | Contact your technical |
| Transfer | is not installed correctly. | representative. |
| Belt Unit and close all doors. |
|
|
|
|
|
|
| Please insert Waste Toner | The waste toner bottle is not | Correctly install the waste |
| Bottle | installed correctly. | toner bottle. Otherwise, |
| and close all doors. |
| contact your technical |
|
|
| representative. |
|
|
|
|
| Please insert the Fusing Unit | The fusing unit, fusing web | Correctly install the fusing |
| and | unit, and | unit, fusing web unit, and oil- |
| Fusing Web Unit and Oil | not installed correctly. | coating unit. Otherwise, |
| Coating Unit |
| contact your technical |
| and close all doors. |
| representative. |
|
|
|
|
| Close ➜ Section properly. | Since a copier door or cover | Make sure that all doors and |
|
| is open or an option is not | covers are closed and that all |
|
| installed correctly, the copier | options are installed |
|
| is unable to make copies. | correctly. |
|
|
|
|
| Replace Staple Cartridge X. | The staples have run out. | Replace the staple cartridge. |
|
|
| p. |
|
|
|
|
| Misfeed detected. | Since a paper misfeed | Clear the paper misfeed. |
| Remove misfeed at O. | occurred, the copier is | p. |
|
| unable to make copies. |
|
|
|
|
|
| The Exit Tray has reached its | Since the maximum amount | Remove all copies from the |
| capacity. Please remove all | of copies for the indicated | indicated tray. |
| pages from | finisher tray has been |
|
|
| exceeded, the copier is |
|
|
| unable to make copies. |
|
|
|
|
|
|