Kyocera KM-C1530 manual To set the OHP Interleaving function

6

Advanced Operations

6.9Inserting Pages Between Copies of Overhead Transparencies (“OHP Interleaving” Function)

After each overhead transparency is copied, a page from a different paper source can be added to the stack of transparencies as an overleaf. In order to use this function, the overhead transparencies should be loaded into the multipurpose paper drawer (1st drawer).

Note

We recommend that interleaf paper (inserted paper) with the same size as the overhead transparencies first be loaded into any drawer other than the multipurpose paper drawer (1st drawer) with the same orientation as the overhead transparencies.

To set the “OHP Interleaving” function

1Position the document(s) to be copied. (Refer to page 4-1 for more detail.)

2Load the overhead transparencies into the 1st drawer, and then set the media type selection dial on the drawer to “OHP”.

3Select the desired color mode. (Refer to page 2-20 for more detail.)

4Touch [Auxiliary].

The Auxiliary screen appears.

5Touch [OHP Interleaving].

6-30 KM-C1530